Search results for query: *

Cool... "dat DATABASE ISSUE DATE(d/m/y)/TIME SIZE(recs) SEQNO Main 2515ß 18/01/2006 at 00:01:44 45 1393 Secondary 2515ß 17/01/2006 at 09:23:50 45 1392 Backup database not accessible. Current backup is on floppy diskette on CMDU 1 . EDD000 . CIOD157 INFO...

Oh, and any idea what those diskettes that were in my drivers were? "Question 2 The switch came with two diskettes in it. Both are labeled as "Database Archive" with the serial number and NTI# on them. One has "(CE/PE)" on it while the other has just (CE). What are these disks?

During the daily routine, does it backup to both diskettes for both cores, or just the active core? From reading the extremely dry Nortel manuals, it seems like it would just backup the active core, then switch to the other core. Buster

With overlay 043 loaded for the daily routine, doesn't it do a dump to diskette? Is it just a dump to harddisk?

First off, let me say thank you for all the help you've given me. I've greatly appreciated it. This being a new startup company, funds have been pretty short. So I've turned into a hand-on manager again until we can afford some staff. So, now I'm working on my Disaster Recover Plan and...

No such luck. It doesn't work. Although, it does come in handy for my other problem with two SCR keys setup for a DN that isn't a physical phone. Now I have a 2616 configured on that port and the two lines ring perfect, with the third caller going to vmail. BTW. IDC doesn't work right as...

It has the same part number as my other digital line cards with 16 ports though. Unless they put out Beta's with the same part number as production 16 port cards. They do list that card as having 16 data ports on it in addition to the 16 digital lines. I could have sworn you weren't permitted...

Ok, wierd thing. All NT8D02GA digital line cards have 16 ports, right? This one showed 24 as being available with LUVU??? REQ: luvu TYPE: 2000 TN 28 0 3 TYPE 2000 TN 028 0 03 04 8D VCE TYPE 2000 TN 028 0 03 05 8D VCE TYPE 2000 TN 028 0 03 06 8D VCE TYPE 2000 TN...

Reusser, What do you mean by a data TN? I tried cpying 2616 to port 16 (a DTA port), but that didn't work. Buster

Hrmm, Ok. LHK must be in addition to some global setting somewhere. For 7158 (the DN not on a Key00 anywhere) LHK 1 - 1st call rings, 2nd caller busy LHK 2 - 1st call rings, 2nd caller vmail LHK 3 - 1st call rings, 2nd caller rings, 3rd vmail For the main DN for that TN though. LHK 1 - 1st...

Hrmm, what's wierd is it already has the that behavior on 7150, the primary DN for this TN, with "LHK 1". Lemme give LHK 2 a try. Thanks, Buster

Ok, I'm probably going about this the wrong way. I have a TN setup with a 2616 set for the operator. She has visibility of several DN's for some key people. She can pickup calls for those people on both of their lines with keys programmed with SCR. Those all work fine. We have a DN that'll...

eroberts9, Makes sense, it was a pretty small system that I saw it on. Maybe I'll just see if I can whip up a passive repeater for the broadcast bands to see if that helps. Ya, I'll do that in my spare time. Buster

About 15 years ago, this place I worked at had a [Music] button setup on every station. When activated, music would come over the speakerphone and be interupted when a call comes in. It played the hold music. I didn't think much of it until I've started working in this huge metal building...

Excellent!!! That was it. CLS UNR. It's working. Ok, now I have to go add that to all phones. Thanks a bunch! Buster

Ok, bonehead move. I have gbix blocks and stradled two pairs of house feeds. Now I'm getting the dialtone of the Valcom, but cannot send dtmf to choose the zone once the Valcom picks up. I dial 7200, get the valcom dialtone, press a number and get fast busy, ERR404 0 pops up on the console...

Wow, my engrish weren't so goodly on that last sentence. Sorry, it should have read. "I had used this paging system before on a Lucent Switch. When you dialed into it, the paging unit would answer and generate a tone. You could then dial the zone you wanted to page." Buster

Ok, got the TARG cleared. Still nothing. When I dial 7200, it's just dead air. It does nothing until I press any number key, then it pops that ERR404 0 on the console and the phone does a fast busy. I had used this paging system before on a Lucent switch, and when you accessed it, you would...

OK, got the card (NT8D14BB)in last night. This morning I slid the card into slot 6. I'm missing something though. When I dial the ACOD (7200) I get a fast busy and see "ERR404 0" on the terminal. I tried clearing the "TARG" with x1, but it stayed 06. I then entered 1, and now it's shows 01...

The guy I was going to have install a universal trunk card in our Option 61c flaked out. So, I figured I might be able to tackle this on myself. I can do moves/adds/changes and I've managed to stumble my way through a few other things on the switch. The card is on it's way. I'll need to...