Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mikeraut

    HiPath 4000 CDR Output upon Call Registration

    To invoke a CDR record every 30 secs ADD-GRZW:RCD,,1,000030,0;
  2. mikeraut

    HiPath 3000 using Topex IP to GSM router

    I am trying to connect a Topex IP to GSM router (http://www.topex.ro/en/products/mobilink_ip_-_voip-gsm_gateway) to a 3550 with out much success I can recieve incoming calls but am not able to call out. I have made the required changes to the HG 1500 card as well as set up a LCR route. Have any...
  3. mikeraut

    HiPath v6 only accepting calls from mobile phones and not land line numbers

    Has anyone experienced calls from one network and not another. Is is a new installation on a HiPath v6. This is day 2 of checking and rechecking... What could possibly be causing incoming calls from mobile phone 00333xxxxxxxxxx and not from 031xxxxxx Otherwise all the functions are perfect. The...
  4. mikeraut

    HiPath 4000 v6 Change Date

    To Iamnothere: Seem to have a bug! I am able to change the Region, Country etc with Yast, but the actual time does not budge. I higlight the time HH or mm value and am unable to change...up arrow, down arrow page up, page down, plus, minus - Will you see is your version responds.
  5. mikeraut

    HiPath 4000 v6 Change Date

    How do we change the date on version 6 since CHA-DATE no longer is supported? Is there anothe command Thanks, mike
  6. mikeraut

    SNOM 300 on HiPath 3500

    Sorted, you have to add support for 'Broken Regustrar'
  7. mikeraut

    SNOM 300 on HiPath 3500

    It's an internal network, no firewall
  8. mikeraut

    Looking for TLA2 & TLA4

    I have sourced cards from a vendor in the UK, Thanks
  9. mikeraut

    SNOM 300 on HiPath 3500

    I have tried to get a SNOM 300 SIP phone configured onto a 3500 v8.550.80 with HG (HXGS 3)HI-G15.85.005 card and all the latest patches. I have managed to get a call from SIP to analog phone, but always one-way speech. Anybody had a similar problem?
  10. mikeraut

    Looking for TLA2 & TLA4

    I am looking for 5 of each card, TLA2 and TLA4 for (older version)HiPath 3xxx systems. If anyone can let me know the URL, email me at mikeraut on gmail (I hope I have not gone out of bounds with this posting - I am not selling!!)
  11. mikeraut

    Connecting Aastra 6730i SIP phone to HiPath 4000

    Has anyone had success in connecting a Aastra 6730i to a HiPath 4000 v5? The pabx has both IP (openscape) and SIP (410)phone coonected. Any advice please?
  12. mikeraut

    HiPath 3000 Manager E

    Has anyone had any success writing an application that makes use of the HiPath 3000 Manager E. Alternatively, any information on 3rd party user interfaces Thanks, Mike
  13. mikeraut

    DISA on 300 or 4000

    Has anyone a procedure document to set up DISA working?
  14. mikeraut

    On line manuals in PDF format

    For those of you looking for a great site where you can find information on many Pabx systems try the following URL pdf dot textfiles dot com slash manuals
  15. mikeraut

    ISDN Programing required - HiPath 3000

    In reply to CarGoSki: I am doing exactly what you mention. I use the PC that has an ISDN modem to dial the pbx in the field. I make use of the HiPath Manager E What I need is a programmer to be able to automate this process using VB to automate this process. I have searched for a solution that...
  16. mikeraut

    ISDN Programing required - HiPath 3000

    I am trying to create an automated process to remotley add and remove account codes from HiPath 3xxx systems in the field. Very much like the hotels use when checking a guest in/out of a room. Normally this would be done via the V24 (RS232 serial port)but I would like to do this from a central...
  17. mikeraut

    ISDN Programing required - HiPath 3000

    I require assistance from someone who has managed to talk to the Siemens HiPath 3000 using the ISDN protocol. The HiPath Manager E does a fine job, but (in my opinion) does not have a OLE interface for a 3rd party app. Is there a solution to this? Or has someone managed to write an i/f so that...
  18. mikeraut

    call charge in display hicom 3750

    E-Manager, Call Charges, Output format, CDR at station then tick Display amountsinstead of units Goto Factors Tab and set up the multiplier that best suits your region
  19. mikeraut

    How can a macro overwrite export file?

    I have added a macro to export my query to MS Excel. The resulting file needs to be replaced each time the macro runs. The oprions within the macro editor for Autostrat are Yes and No. Is there a solution to allow the macro to replace the file automatically? The alternate solution would to...
  20. mikeraut

    How do I schedule a query?

    I have a MS Access database that I have written a query for.I would like to produce a MS Excel file on a daily basis. The process is manual at the moment and I would like to know if this process can be automated without incurring the cost of a 3rd party application?

Part and Inventory Search

Back
Top