Search results for query: *

Yes I've tried re-seating the card. I'm trying to do this from an XP machine and not Windows 2000, I'm assuming this should be ok?

Thanks for the reply. Yes that is the guide I have been using. The wiring appears to be correct. I get messages to say Local modem connection established Remote modem connection established Remote PPP peer is not responding

I have a DMC8 card which I am trying to communicate with via serial cable. (I do not know the IP address of the card as it has been changed). I have checked that Jumpers J6-J9 are set to v.24. I have cross-connected my serial lead to the krone strip I have followed GHTrout's procedure but...

Replaced SSC again and updated the deplists and this now appears to be fixed (after a week of monitoring). I never did find out what address Addr=0xa0010000 referred to specifically!! Thanks for everyones input.

TelecomGuy, this is a 1000S with small System TN's. JohnPoole, This is happening on average once or twice per week. The switch WAS cold starting due to COM0008 a few weeks ago so we replaced the Call Server SSC. Now the COM008 have stopped it inhibits BERR704 (followed by cold start!)...

BERR704 EXC 0: Bus Error in ISR SR=0x2708, PC=0x10fa770c, Addr=0xa0010000, SSW=0x105 Can anyone tell me which slot address 0xa0010000 relates to?

Did anyone get a fix for this? I'm seeing a similar thing. When viewing an outbound CDR record I see the dialled digits in the record prefixed with the AC2+ZDP codes. ie: N 052 00 3302 A066 060 03/13 10:45:42 00:02:48 .0 A6400002073452323 &...

I would say that what you're doing wrong is trying to use TM without the appropriate training :)

I have a problem with our fax machines on our CS1000E. Whenever I am sending faxes it will handshake with the far end then fail. I can try this a few times and it will eventually transmit. The calls go from the 1000E to a 1000T and break out to the pstn there. It is a rls 4.50 system. It...

As John Poole said, you need to build the route and at least one Music or Ran trunk on the card otherwise the card will stay in the 'comapanding law' state that it's in right now.

Did you resolve this? I have a similar problem where calls into our call centre (1150 users) sound 'muffled' to the external person. The 1150 users reports no defect. These calls come in from another CS1000 via a data link to a 1000B - which is then linked to our CS1000 via DPNSS (I know...

I have since discovered this....it is the same on I2002. Thanks for the replies.

I am having a similer problem. I have 3 users whose 1120E sets do not display the CPND on the same line as the DN. Did you ever resolve this? If so, how? Thanks