Hello fellow techs,
Well the console was more stable today after the rexconnect. but now the client informed that the set went in ABSENT mode and she had to use the function keys to bring it back to normal.
Any thougths.
Just a note ; sometimes clearing up the language used between client...
When you say reboot, does the alarm condition say "Set out of Service...Loss of Communication" ?
or does it tell you that it rebooted.
I'm leaning towards some kind of induction on the house cable pair that causes intermittent. We'll know by the end of tommorrow.
If the condition reappears...
In order to isolate the problem, i've rexconnected a different pair on a different binderr of the house cable. We'll see if it goes down again.
I will post whatever happens.
As per the handset/Headset scenario, I can see the console going into night mode, but it loses connection then afer a...
thank you for the response, here's the info i get
System 3300
S/w - 7.1.4.9_ 1
SC1000 - COS (1440 )
Error Message
Source; call control maintenance
DESC: MC330AB
SC1000
LOC: 0610800101
Set out of Service ...Loss of Communication
three seconds later set comes back on with following message...
Hello,
For some reason the console defaults to night Mode over the course of the day. it happens about 4 or 5 times. other then that, it works just fine.
The client tewlls me the programming is fine. they tried new consoles and they also reassigned ports on the Mitel.
Has anyone experienced...
Tennis ball sounds like a good idea...will try it....Did find Black Widows's at Cabela's....a little thin walled but will do for now...looks liek they extend to 30 ft.
On another note: I use a 1 in. wide measuring tape to fish insulated walls.....I bent the clip so it didn't retract. It cutsd...
Terminate the cable in the clock housing, there is usually alot of space seeing there's a battery in the unit....use a normel surface mount box and Cat 5 connector ( I like panduit myself), then patch into it interface with telco line cord....
By doing this you maintain the cat 5 spec should...
Thanks guys, but am interesteed in the telescoping ones....we used to buy them from a company in vermont int he early 70's and 80's...they went under, taiwan stuff you know...anyhow, fully collapsed the unit is about 5 feet with about 6 sections to the telescope....personally I don't like using...
We've installed straight thru Cat5 - 568A ( or B for the US ) cable and the Squirrel installer is having trouble connecting.
Question i have is this....the pinouts for the terminal connecting to the host , are the recieve and transmits reversed, unless he's using a 10/100 Switch or Hub to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.