Search results for query: *

Greets :) have you removed the left side (just two screws holding it on) and watched to see if pickup roller turns when it fails and gives you the jam? I've had this problem before and found that solinoid was bad would engage pickup roller only when it felt like it. or so it seemed.. remove the...

Greets all this one is trying my patiance :0 its stopping in output area but only on single side prints duplex it seems to work fine. also not the usual stuck on drum jam either.ive replaced the exit solinoid(clutch) or whatever the heck it is called again.. lol not the drum one but the exit...

this one is driving me nuts :( it came in with image problems found nice tear and buildup of toner on fuser orderd replaced seemed fine customer calls says toner is flaking off of prints( i Know set the corect paper type) wich i explained to customer they did that. still flakes so xerox sent a...

Greets dany1 after reinstalling the new ram and finding out the other font chip wouldnt work amazingly when i reinstalled the original font chip it finally came up now its jamming in exit area and leaving a image on the drum when i try to print it jams and theres like a 1/8 inch strip of the...

greets all this one seems to have multible troubles first error light flashes 3 times pauses three again i took out ram now it flashes 2 times so replaced font chip with one from a 840 then i has solid power and solid error light no flashes and still nothing on the display ..... is it the...

greets all i replaced this units maintenance drawer about 6 weeks ago seemed to fix error now they have run alittle over 100 pages and are getting this message again could it be a sensor or maybe i misdiagnosed? any suggestions or help will be appreciated thanks in advance Brian

got this printer in with bent frame would click and grind badly after fixing paper feed rollers in front (they were bound up) im now getting it to say warming up gets to 99 percent then says warming up forever never comes out of this state no error code or anything i tried cleaning the drum...

I currently have a paper jam message that comes up right after self test. I replaced the sensor board n9a-3144-00, and it did not help. I have checked the entire unit for any jammed paper and found none. I have also installed the drum heater assy per my customer. occasionally a ROM error will...