Have a Altos G510 server that has shoutdown unexpectedly on four occasions in the last two days. The System fault indicator lamp is glowing constantly.Operating system is Server 2003. Any clues as to where to start fault finding?
Jasen,
I will copy the folder from another workstation which has a default user.The original image is one which I had built that does not have a default user folder. Is there something in the setup of XP that I am missing?. Will set up a new image on another machine and see if it has a default...
Windows XP workstation normally connected to network has Administrator,Student and teacher profiles. I want to create a new profile for some individual logons. I logged on as local Administrator created a profile. Logged back onto the network went to copy the newly created profile to the default...
On a network running server 2003 with XP Pro workstations, have three different logons two of the logons are OK.When I log on as a student everthing is OK get the corect desktop etc but on 3 or 4 workstations when I open up Word or any program the keyboard is locked and unable to type in...
Terry,
Users log into domain, all users use the same login script as in the simple login script.
Will try your suggested script file and download ifmember.exe.
Regards
Michael
Terry,
Are the groups in AD?. What is AD?.
Have a simple login script
rem @echo off
echo.
echo.
echo Logging on to Curriculum Server
echo.
echo.
net time \\server /set /yes
echo.
echo.
net user * /d /yes
net use h: \\server\staff\%username% / yes
net use I: \\server\students / yes
net...
Terry,
It is a domain server running windows server2003, the workstations are all windows XP. Have not set up any roaming profiles as yet.
Server was running NT4 with Win98se workstations.Formatted server drives fresh install of server 2003 installed with workstations running XP(steep learning...
Have a small School network Server 2003 with two groups, Staff and Students. I have installed a program on the server and have a shortcut icon on the Administrators desktop. How can I put this on the staff desktop.
I have small network of Windows XP machines and a Window server 2003.
Have just received from another department 3 x Lexmark S1855's with network cards.
have installed printer software on the server given it a static IP address and shared the printer, all looks OK on the server.
I have connected...
Windows Server 2003 Standard with 50 Xp workstations working fine. Have a student and teacher logon.
Have just got another 20 pc's and I have created a new image (logged on as administrator)and all the programs run fine.Joined the domain and everything works OK logged on as Administrator. When I...
NT 4 with Win98 workstations. students logon and have access to everyones folder/files. Just recently folders have been deleted by persons unknown. Have now created individual user accounts and folders for their work. How can I make it so an individual user can only see and change work in their...
Grenage
During NT4's boot sequence I did not get to choose between Normal or VGA mode, Have almost worn the F8 key out and rebooting to get the VGA option. Finally I got the option and was able to reset the Monitor settings. Recovery options set to zero was the problem.( now reset to 4secs) and...
After power failure re-booted NT 4 Server.screen size incorrect went to change settings and screen went blank, then a message "out of frequency" "power management counts from 20 to 0 and screen goes blank. Now i dont get a logon screen. Any clues??
SYAR2003
My SATA drive is connected to SATA1.
Have looked at faq779-4641, In section "Check if SATA drive is connected" I get no display Press ctrl+s.
In the BIOS setup the sata drive is detected as third master.
I reconnected a IDE drive with XP on it and booted up and the system...
SYAR2003
In your faq779-4641 under first steps in common BIOS
In Integrated peripherals setup menu under onboard PCI device, enable Serial ATA controller.
On my mobo under Advanced I have set the onboard Promise Controller to enabled and the Operating mode to RAID the other option is IDE. Is...
wolluf/SYAR2003
I have connected my SATA to the SATA1 connection on the mobo, not to the SATA_RAID1 is this OK?
I only have XP Pro on one CD and SP1 on another, is this a problem?.
Can I still set up a RAIDO even though I have only one drive?. I must try and find out some information on this as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.