Search results for query: *

Thank you both, this is just what I was looking for. I have many users that are on 2008 phones with key 00 hunting to scr keys 01 & 02. I would like to upgrade them to the m39xx series phone that matches up best to the 2008. For my 2616 users, I assume the m3904 would be the one. your thoughts...

can someone post a TNB print out of a typical m3904 or other m39xx phone. I'd like to see what the options are. Also, can the m3901 and m3902 accept secondary calls while the phone is in use? (roll over lines) TIA

thanks for the response, Scrambler. I have things working. It's a simple case of "self-taught phone guy" needing to dig in and not dance around the obvious. The NCOS in my ARS routing was too low to allow access to the TIE trunks. I assumed the NCOS in the TRK coding would apply and didn't look...

I have 10 Opt11c's connected to a central site with an Avaya G3. The Opt11c's depend on the central site for Octel voice mail and intra-office dialing. I am trying to setup a local CO Trunk at one of the Opt11 sites to ATDN to a local extension which uses an FDN or Hunt entry to rout the call...

Anyone have some tips on testing lead-acid batteries in a UPS. I have an Alpha Technologies UPS-1000 with some small 12v batteries in the main inverter/charger and an auxillary box with 3 full size 12v batteries in series for 48+ vdc supply. With the cables still attached and the unit running, I...

11 is a replacement string for the * to allow use of rotary or pulse dialing phones. This is a function of the LEC's switch. Nothing to do with the Option 11. *67 is the Telco's code to cancel caller ID. In another location, I was able to use the string 1167* to block caller ID. The 11 replaces...

I am trying to use digit insertion to send a * to the LEC for custom feature access. The problem is, insert treats the * as a pause character and doesn't send it out with the rest of the dialed string. According to the LEC, I should be able to substitute 11 in place of the star, but that isn't...

See if you can use load 57 to build feature access codes to enable and disable message lights. CWGA to activate and CWGD to deactivate. I haven't used this, but it appears to be what you're looking for.

Standard Mailbox Types 0 Voice Messaging full feature subscriber mailbox 6 System Distribution send to list of mailboxes 28 Extension 29 Dial Mailbox by Name dial by name directory mailbox 30 Automated Attendant call routing based on ext |OR| name 34 Transfer Mailbox...

I don't claim to be an ARS expert, but since the ARS digit insert feature only adds leading digits, couldn't you create this as a personal or system abbreviated dial entry with the "#" at the end of the dial string?

I'm installing a used ProLogix without benefit of the octopus cable, so I asked a similar question here a few days ago. I didn't get the answer so I researched the pinouts and built the attached table in Excel. Column 1 lists the pin assignments on a 110 block wired to J1. The RJ-45 pin...

I am trying to do a similar thing, but I would prefer to use message waiting voltage for the strobe so that it flashes until the message is picked up. Traditionally, message waiting is similar to analog ring voltage, ~90VAC at 20Hz, except it is only half of the wave form. This makes a...

I am trying to hook up a local console and modem to a ProLogics without benefit of the Processor Interface Cable. I need to know how to wire an RS-232 connection directly to the 110 block for J1 TIA

Thanks, Colin. That is exactly what I was looking for. MaXJohnson

I haven't been able to find a detail description of each of the access restrictions used in a station CLS. Can someone shed some light on this? TIA Conditionally Toll Denied Conditionally Unrestricted Fully Restricted class 1 Fully Restricted class 2 Fully Restricted Semi-Restricted Toll...

On an option 11c, is there ia way to display the real time status of T-1 channel signalling bits? TIA

Whoops! The system I need to check signalling bits on a would be a G3R or G3si. thanks

Is there a command to display the real-time state of the signalling bits on a DS-1 channel? TIA

I am trying to execute some commands in LD 60 that can take either a "loop" or "card" as a parameter. How do you differentiate between loop and card if the loop is 1 and the card is in slot 1? I am trying to reset the card using DISL, STAT, ENLL, etc, but only seem to be...

Is it possible to do a sysload or IPL the PBX remotely through the modem port? TIA