hello,
if i start arcserve 7.0 on a netware 4.2 sft3 server (ASTART) the server crash (reboots automatically) by loading the last NLM - TAPESVR.NLM
the tape drive HP ULTRA LTO 1 is connected to a separate ADAPTEC SCSI 29160 controller.
are there any service packs or any other solution...
hello,
i tried to run now my netware 4.2 sft3 server via TCPIP
i can ping all IP address (IO engine, MS engine) but with XP SP1 + netware client 4.9SP2 no TREE/Server could be found...
what is wrong/missing?
i configured the server (as found in novell doku) as follow:
IO1:
----
LOAD 3C90XC...
hello,
i tried to run now my netware 4.2 sft3 server via TCPIP
i can ping all IP address (IO engine, MS engine) but with XP SP1 + netware client 4.9SP2 no TREE/Server could be found...
what is wrong/missing?
i configured the server (as found in novell doku) as follow:
IO1:
----
LOAD 3C90XC...
hello,
i am searching for backup software arcserve 6.6 or 7.x for netware 4.2
at the moment i use version 6.1 which is not supporting driver CANWPABD.cdm for a faster backup as old nwaspi.cdm
the newest arcserve version 11.x is not supported for netware 4.2
thanks,
martin pilz.
i will tell you a short situation/story, maybe you have any idea…
user 1 is connected on the LAN to his WINXP pc with novell id ID1 and windows NT id ID2
he has access to a server share SERVER1\Share and works with OUTLOOK
now he is on business trip for some weeks… if he starts his notebook...
hello,
we have the same issue with our outlook 2002...
the company who "manages" the EXCHANGE server says the problem is on the LAN but i don´t believe...
any solution?
thanks!
hello!
we use a netware 4.2 SFT3 server.
in one IO engine the INTEL EtherExpress PRO/100 smart card (MSL) is now defect.
this card is used for the MSL link between the two engines.
i have heard now that this card is no longer available.
what could be done? exist there any other MSL card...
hello,
wir verwenden einen MS SQL Server 6.5 SP5
(ein upgrade auf 2000 ist derzeit leider aus org. gründen
von der firmenleitung nicht gewünscht)
die clients (NT4.0 + WinXP) verbinden sich per 32bit ODBC treiber (Named Pipes) auf den SQL server 6.5 (ms access 97 - ODBC-tabellen)
die frage die...
i know this, sorry, but if i activate workstation only,
enter the password (for NT logon only) the pc hangs...
if i try to change the NT domain to local pc name,
the pc also hangs... (hourglass)...
yes, but the problem is i cannot logon...
as if i start the pc (vga modus, ethernet card disabled, network cable not connect, offline modus, ...) and enter the password, nothing happens and the pc is hanging...
regards,
martin.
it´s not always the same port... and the next day the same port works well... i tried already other patch cables, ...
i had the same problem in the meantime with 3 printers
(10MB/Half duplex)... and with another pc (100MB/Full duplex)
so ???
Hello,
ich habe einen pc NT4.0 SP6a mit Netware Client 4.8SP2...
dieser pc läuft tagelang problemlos... plötzlich kommt beim booten
nach dem login (eingabe des pwd´s) die meldung:
"a required network service has not started"... und man kann sich nicht mehr einloggen... der pc...
Hello,
nortel baystack 450T (1 stack - 2 switch cascade) - pc 100MB/Full - SwitchPort: 100MB/Full - Spanning Tree - Port: FastLearning
the most time the pc´s run well on all ports... but sometimes, a pc on one port which was running without any error for some hours, lose it´s IP...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.