Search results for query: *

I agree with previous answers; wouldn't store sensitive configuration and information on a free online service. Check out FreeNAS. It's a mature OS product that allows you to create an in-house NAS on just about any hardware you have around. You can set up LDAP (to your AD or other source)...

Make sure it's a symbolic link first. ls -la will give you a detail listing. The listing for your ansys_inc should indicate it is symbolic: "l" as the first letter in the permissions list. If it is you simply "rm" the link. If ansys_inc has a size of 4096 it is a directory; do NOT remove it...

Here's a brief summary of what was going on (and things to check if you run in to these issues): Windows 2000 Server Failed to change to DST; this is the basic root cause of the main issues. Because the time between the domain controllers was an hour off the comm between them went bad...

I had to break down and call in the big dogs at MS Support. This particular client is a CPA firm. Can you guess what time of year it is for them? Not the best time to have this problem... KMCFERRIN: Thank you very much for posting up here and assisting. You're on the right track. I will post...

Just had a Vista box connect (DHCP) to the network and nslookup resolves just fine for him. The XP systems cannot resolve the 'short' names. I know the domain join uses FQN but there is most definitely a DNS issue here and I suspect it is the root cause of the XP system's inability to join the...

No go on the re-register. I did get closer to calling this an absolute DNS issue. I turned off DNS on the old server and now NSLOOKUP fails. When the old one was running I had resolution for everything. Now I get a timeout/server not found. nslookup fs2 results in: Server fs2.domain.net...

I have an interesting issue with a client network that I have been working on for about 20 hours now to no avail. I will try and keep this as brief as possible to get the ball rolling here: Original Client Configuration 1 Windows 2000 AD Mixed 2000 and XP workstations New Configuration A new...

I am having difficulty with NFS permissions on my SNAP server, specifically inherited permissions. I'll try to "write" you a picture... SNAP Server Details SNAP 4500 with 4 250G Drives, RAID 5 (VOL0) SNAP 10 expansion array with the same drive configuration (VOL2) VOL0 is setup with "Windows"...

Thanks Dean. I had a card, hdd, and software sent overnight to me. It just arrived. We are planning the replacement this afternoon in about 2 hours. I am going to pull the old drive and try the freezer trick first - it will only cost me a little time to try and may save me lots on the re-build...

Pulled the card out of the system and left it out for 20 minutes. Just put it back in and it hangs at "FOX Security Check". Everyone I talk to thinks it's the HDD...dang....now I have to find an old SCSI HDD. -T

Thanks for the info John. No, have not been able to get in to mail at any time. Here's the latest: LD 48 Disabled AML LD 32 STAT 10:: UNITS 4,5,12,13 IDLE BSC LOG IN I disabled the card and removed it - put it back in, hit reset right away, and then ran AX to watch. It got to PRM FOX Security...

No go so far. I'm officially at a loss. Maybe the HDD died. Is there some way to check that? And, to help further, what are layer 2 and 7 (LYR2, LYR7)? Thanks, T One more thing - where do I look to dicipher the error messages; like AML001 09, etc.?

Option 11c My mail card though doesn't have a power switch on it (I hear people talk about powering it down for a few minutes). I pulled the tape dr cable and ~think~ I got father along - the ACT light was steady green instead of slow blinking but still can't enable layer 7. LYR2 is OK ENL...

I am having the exact same issue this morning - I have tried the standard ENL AML commands - I'm going to try a few more things as well now - keep this topic alive - zabagar: if you found a solution, let us know. -T

Turns out I had the same problem as the link below. I made the change listed and it works now. http://www.tek-tips.com/viewthread.cfm?SQID=879269&SPID=798&page=1 yaaaaaaayyyyy -T

Here's a little more info: First and foremost - I have just started working with my current company - they inherited this Option 11 from the last company that accupied this suite. Because I could spell T-E-L-C-O and actually knew what it meant I was given the responsibility. I have no experience...

This is the setup of the phone in question: DES SEDD TN 015 0 00 03 TYPE 2008 CDEN 8D CUST 0 FDN 6166 TGAR 8 LDN NO NCOS 5 SGRP 0 RNPG 0 SCI 0 SSU LNRS 16 XLST CLS CTD FBA WTA LPR MTD FNA HTA ADD HFD MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1 POD DSX VMD CMSD SLKD CCSD SWD LNA...

I have a customer support phone that has a DID assigned and a toll free number ported to it. Internal 4-digit calls, external inbound local and toll free calls all work fine. At night we have to forward this to a cell phone - here's where the problem is: I forward the phone to a cell phone If I...