Search results for query: *

This is the motherbaord information Compaq Assy No: 008099-103 Compaq Part No: N/A Compaq Spare No: 155347-001 if there is any other information need please let me know. Thnx, Wm

I have upgraded the system board in my proliant 3000 and now it will not start. I noticed that there is an amber light on the board with the marking CR713 under it says VAUX. When i hit the power button all seems to get power some of the green LED's on the board light up and the raid board...

I have been going nuts with a problem. I had an older proliant 3000 motherboard -SP#306561-00132CAE1JG895G. I could not get 2 processors to work in it. I then upgraded the motherboard to-P26A3ANK3J807J. I tried to use the VRM's and used a matched pair or PIII 450's. the VRM's were...

Sorry about the delay getting back to. THis is a Lab Server and we had a break for 2 weeks. anyway here is what info i gathered: Proliant 3000 System Rom Info- Rev. E39 4/19/2000 Porcessors are identical. Under the system info off of the CD it asks of the failed processor has been replaced, if...

Yes they are the same type/speed/stepping.

I have been going crazy to fix this issue and would appreciate any help. I have a Proliant 3000 and have installed a 2nd processor. It works fine when each is is installed seperatly. When I boot with both it gives me me an error 212-processor 2 fail & 178-invalid configuration. I dont know what...

I have a proliant 3000T /333 its running windows NT4 server SP6a, IE6 and I had updated the Security rollup patch from microsoft. The computer will not load now. It shows a Disk I/O error and i had updated the cpqarray.sys driver and still it is not loading up. if anyone has ideas on how to get...

I am new to setting up a server from scratch. I have a proilant 3000 /333 for test purposes. I wanted to know if it was possible to change the processor from PII333 to a PIII and what it would entail to do so. I also wanted know about setting up a duplex raid and if that was possible with the...

I have a Proliant 3000/ 333 with a 2/P controller and have 8 4.3 gig drives in the array cage. I have green lights on all of the drives, except the one in the upper left corner. I cannot see the drive when setting up the raid array. When i move the drive to any other spot it turns green and...