Search results for query: *

Hi all, I am trying to get VPN set up on an ASA 5510 w\ Advanced Security. The login in the client succeeds, but all connections fail. In the VPN client window, the Bytes In is stuck at zero. In the status window, "encrypted" changes, but "decrypted" is constantly 0 and "discarded" and...

Yes - the whole thing is a spreadsheet - the user doesn't have Excel so it is nothing but a table.

By the way, you really should do some checking on those variables - the way you have it set up a user could inject their own SQL into the query. Try addslashes() and stripslashes().

Hi all, I got a trouble ticket today that stated the following: "I am trying to print a document on legal paper. It appears fine in normal mode - legal size and landscape, however, when i go to print preview, it is shown on two different legal pages. i checked and there are no page breaks."...

OK. gi0/0 is connected to a Catalyst 3560. When I plug gi0/1 into this switch also, my internal DHCP server hands out an IP. When I plug gi0/1 back into the cable modem, and reboot both the modem and router, I get no IP. hope this clears it up.

BTW, If I plug the outside-facing interface (gi0/1) into a switch it grabs an IP instantly.

Hi all- I am trying to have a cisco 3825 get an address via DHCP, but it doesn't seem to take one. Here's the current config: I'm guessing it has something to do with the firewall setup, but I can't tell... TIA Building configuration... Current configuration : 6180 bytes ! version 12.4 no...

Reset it and redid the commands. Still the same error. Is the IOS too old?

The router uses AAA. When I get the login prompt it will take my username, but not my password.

OK, so here's one. I pulled the VPN module, and now I can't log in to the router! What happened?

3 Users only... I'll begin the dissection... Now where did I leave my antistatic wristband?![bigsmile]

cvpn01(config)#crypto isakmp client configuration ? address-pool Set network address for client cvpn01(config)#crypto isakmp client configuration

It won't take this: cvpn01(config)#crypto isakmp client configuration group xxxxxx ^ % Invalid input detected at '^' marker. cvpn01(config)#

Here it is... #sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.2(4)T1, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Thu 25-Oct-01 19:50 by ccai Image text-base...

Burt - the router won't accept some of the commands in that link. I give up - I'll just get a VPN3000 on ebay. Thanks for the suggestions.

OpenDNS.com works every time for my network, and it's FREE!

The SDM says the 1720 is unsupported, I'll check that thread you posted.

Thanks Guys. I'll check these out and advise.

How might I set up a 1720 as a VPN appliance? Also, does the unit need to be in use as a router or can I just use the LAN port and route VPN traffic to it? THANKS!

As above, use javascript. After your initial CFIF and CFSET, add, as an example, <cfoutput><script>alert("#Message#");</script></cfoutput> HTH