Search results for query: *

Be sure to check the clocking under the hardware/PRI settings. For instance, if you leave an analog card in the first slot it may try to set the PRI/DTI card as the secondary clock source.

Thanks for the responses. Here's what I found. Newer releases of software incorporate a setting in the ATA settings under Capabilities which gives the option of a telephone or modem. When modem is selected, apparently the Norstar request a higher quality service from the provider, per call...

Most of my testing has been with a buttset. Because they have some pots lines for backup, I've left the 9 set to access Pool A and I set up 8 to route through the PRI. I have a software upgrade due in tomorrow morning however I may want to try setting the 9 up as a pri route.

Hi CTCINY, Thank you for your response. I had set up a route and destination code of 8 to use the PRI. The digital sets work fine but the analog station ports just return a fast busy after all the digits are dialed. I've made sure that the Prime is set to intercom and that the pool access...

I'm trying to set up an autodialer using analog station ports through an Analog Station Module and placing the calls over a PRI. I cannot get the calls to go through, I just receive a fast busy after the last digit is dialed. A call can be made over a standard pots line. We have a MICS 5.0...