Search results for query: *

I have 2 domains D1 and child domain D2. I can see and verify that the trusts are set up correctly. D1 and D2 are connected via VPN and I can ping using the server name or IP Address, I can logon to either domain from either site. The problem is: I set up a shared folder, on a server (S1) in...

It is plugged into the internal SCSI bus. In fact I unplugged the tape drive from the bus and the problem still exists.

I have a Proliant 1850 with at 3200 Raid Controller. There are 3 18GB HDD in slots 0,1,2 set for RAID 5. I powered the server off and added a tape drive, when I powered up the server drive 0 was bad and I had to press F1 to continue. The server booted fine and the drive in slot 0 was flagged...

OK, now that we got the software needed to look at these Centillion 100 switches. I need to know how to configure the ATM ports to connect 2 switches together in one big subnet. Any thoughts/problems? Thanks in advance.

Did you try and reset the system back to the factory defaults? I suggest doing that and then start from there. I purchased speedview 4.1.2 and with the c100 switches I have I probably need ver 5.1 or 4.3.2. Do you think I can borrow a copy of ver 5?

You can go to codemicro.com and order part number AS0018003 the 25-pin to 8-DIN cable for the C100. I just need the updated s/w, my switches have been updated.

Could i possibly get a copy of you version 5.1 something. I also purchased the C100 switches and have vers 4.1.2. I could not configure the switches because the software is not up to date. Thanks