under multi media in control panel,make sure all of you playback and recording devices are there.Click on the device tab, then double click on the speaker icon, right click on the drop down menu.Then click on properties. This will tell you the status of you playback device. Enabled or
Disabled...
Are you sure that the disc is being CLOSED(Finalized)???
In your advanced settings you have options such as DAO(Disc at once) TAO(track at once)etc. There are sub options under tha TAO setting giving you the option of closing or not closing the CD or the session. If one of the options for NOT...
Try going from Start>Programs>Accessories>Communications>
Phone Dialer. Click on Phone Dialer,Click on the tools menu, Then click on dialing properties. Fill in what country your in, type in your area code.Then click on the AREA CODE RULES button. Check the box that says 10 didgit
dialing. Click...
Try a communication test between you printer
and computer from your printer toolbox under
programs. If this does'nt work try a new cable.
Sometimes they just go bad.
Had the same problem on a computer. Like
you I was questoning the Mother Board.
Swapped out the processer and bingo!! It
was working again. But it COULD be the M.B.
so don't rule that out yet. But try swapping
the processor first. Or it could be a RAM
problem also.
What type of BEEP CODES are...
I'm assuming that you're not getting any
power at all, or just for a breef second
if any. If that's the case, I'd say that
you're shorting out against the case. Try
loosening all of the screws and try
rebooting agin.If that does it, install
some NYLON STANDS. That should take care
of it.
I had a similer problem with a DVD Play.It worked
fine one day. The next time I went to use it,I had
the same problem as you. Open up the your case and make
sure that the power connector, and your IDE
cable both have "A GOOD CONNECTION"!!! Unplug them both,
than reseat them to make...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.