Search results for query: *

Server = HP Proliant DL380 G4 with hot plug tape unit(HP DAT 72) connected to Smart Array 6i controller. O/S = SCO OpenServer 5.0.7 Has anyone else experienced the following error when performing a backup using a standard cpio command? *** Mon Aug 22 13:51:33 2005 WARNING: ciss <slot 0> ...

The Company I work for issues a news magazine each month. There was a piece written about a seminar that our Chief Exec had attended and the eminent David Blunkett was a guest speaker. There was a lovely picture of Mr Blunkett sitting on the platform listening to other speakers with the...

Fantastic - it is now working. Must have been the only configuration I didn't try!

Quick question...Photo Editor launches minimised (known bug) my problem is that we have restricted right mouse clicks for our users! Any idea what the keystrokes are to maximise photo editor??

Still haven't managed to get this working. Tried all configurations of SCSI/LUN/BUS and adapter with no luck. Any one got any ideas?

Thanks for all our help - I'll try changing the SCSI ID to 2 first and let you know how I get on.

The tape drive is an internal hot swap drive. We have another server (W2K) running exactly the same setup i.e. with both mirrors and the tape drive all hanging off the 641 controller with no issues. Is this just a SCO limitation? I'm sure I've read somewhere that SCO supports this configuration.

Proliant DL380 G3 Compaq 641 Controller SCO Openserver 5.0.7 Smart Array 641 Controller 2 x 18GB Mirrored O/S 2 x 146GB Mirrored Data 1 x AIT50 tape Unit I have successfully installed 5.0.7 onto this hardware and loaded the ciss host adapter at boot time. I've used the 'mkdev...

Have you configured the Authentication tab in NFuse Admin to allow users to change their passwords on expiry?

Thanks gbiello - your suggestion seems to have rectified this problem.

Tell a lie - it's 'launch.asp'.

Thanks gbeillo - I'll try that. And yes Steve, the save file is 'launch.ica'.

Our Nfuse server is not a citrix server. Users connect to the NFuse server in the first instance and then run applications that are load balanced between the 2 citrix servers. As far as I am aware we only use port 80. Thanks

Until recently we have been running NFuse Classic with no problems. We have a dedicated web server and 2 load balanced terminal servers running several applications. A user can log into NFuse and their apps are displayed for them. However, occasionally they will get 3 different errors when...

Install SP3 AFTER upgrading to FR2. Otherwise the ICA passthrough client won't install during FR2 and the Client distribution wizard fails

If you use NFuse Admin you can make the client installation automatic with a checkbox. This is on the ICA Client Deployment link. If you check the 'auto' box the client will download if not already installed. Default link for the admin pages is as follows http://ipaddress/citrix/nfuseadmin/

Ladybug70 Type Q328020 into a search engine and you'll get loads of links. Managed to get mine from Citrix User Group site.

You will be glad to know that the fix we applied has fixed our printing problems! Sarah

Hi Andrew, We had exactly the same problem. You need to apply a hot fix Pre-SP4 Q328020. We have only applied this today so not sure if its fixed the problem yet. Sarah