Search results for query: *

I am having the same problem - WinXP Pro clients to a Server 2000 SP3 server. I have tried disabling SMB Security Signature - no help - then tried disabling SMB all together - same error. All problems occur when backing up to the server using the NT Backup program in WinXP. Since the other...

Well, there is no interrupt set for the video card, so that's not it. Would seem strange if the SCSI card and video used the same address space. I'll keep poking around.

Wrong, you must BUY SmartStart CD.

Use the SCSI array utility to delete all partitions and redefine them.

If I disable the onboard video and try to add a pci video card, it doesn't matter what slot I put it in, it disables the Smart2SL RAID controller - never even shows the SCSI BIOS on power on boot - and therefore, no drives. Any ideas what's going on here?

With ArcServe 2K, v7, I can format, retension, clean, but when I try to back up I get the E3855 error (unable to position media). Adaptec AHA2940W, WinXP Pro. I tried the SP4 update, then the engine update, no help. Is there a fix for this? This drive worked fine 3 months ago. Mike

I have an HP SureStore 12000e tape changer hooked to an Adaptec AHA-2940W SCSI controller. I have been unable to get ArcServe 2K to backup or controll the devices - when I go into device manager, and click on the aic78xx controller, nothing happens - the more info and next buttons stay grayed...

Need to allow the ping port access to the outside. I believe it's predefined.

Well, fixed it. Removed it and deleted all reg entries and folders, reinstalled, same rules, works fine now. Took BID off, FW in WR works fine if rules are set up properly.

My setup is WinRoute Pro running on server, ISP provides DHCP. Problem is, when I reboot the server, because the DHCP info is downloaded before WinRoute kicks in, I get a lease. If after WinRoute is loaded I try to renew my lease (or my PC tries to renew it - ISP DHCP lease is set to 4 hrs) I...