Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Proliant 3000 with Smart2SL - add video card problem

Status
Not open for further replies.
mmatheny

mmatheny

MIS
Nov 29, 2001
10
0
0
US
If I disable the onboard video and try to add a pci video card, it doesn't matter what slot I put it in, it disables the Smart2SL RAID controller - never even shows the SCSI BIOS on power on boot - and therefore, no drives. Any ideas what's going on here?
 
Sort by date Sort by votes
Hi,

It's possible that both cards are using the same Interrupt or memory range.

Lou

 
Upvote 0 Downvote
Well, there is no interrupt set for the video card, so that's not it. Would seem strange if the SCSI card and video used the same address space. I'll keep poking around.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

BULOS
  • Locked
  • Question
COMPAQ PROLIANT 3000 OS WIN SVR NT 4.0
Replies
0
Views
43
BULOS
BULOS
BULOS
  • Locked
  • Question
BESOIN D'UN CD SMARTSTART 4.9 POUR COMPAQ PROLIANT 3000
Replies
0
Views
54
BULOS
BULOS
Marvin111
  • Locked
  • Question
SUN BLADE 1500 / Booting problem
Replies
0
Views
60
Marvin111
Marvin111
kibalabala
  • Locked
  • Question
3 Openscape 500i failing within 2 months of each other
Replies
0
Views
59
kibalabala
kibalabala
Sergey Kravtsov
  • Locked
  • Question
Boot issue with Sun Fire T2000 and Solaris 10 2
Replies
2
Views
84
Sergey Kravtsov
Sergey Kravtsov

Part and Inventory Search

Sponsor

Back
Top