Search results for query: *

We are trying to enable faxing on MM 5.2 connected to Cm 5.2. via sip. fax protocal is set to t.38, we are getting a denial event denial event 2378: RejReqT38-not in rgn/hw D1=0x7f40000e D2=0x1 Any Help would be appreciated I have also copied the trace. time data 14:13:37...

I am trying to use a cisco VPN client with the built in VPN 5610 sw phones. Does anyone have a cheat sheet how to set phone and router up?

I have 16xx IP Phones that sound like you are making a cell phone call, . We setup all phones on own network with POE switches. No other data traffic on network. The Codec is G.711mu under ip-codec-set. Did a list trace on the station with no packet loss. Should silent suppression be set to...

I can not get the message key or the phone/exit key on the 1600 series phones to work? What am i doing wrong? (it's getting the files from the file server) What am i missing? Mark

We're working on a S8300/G450 with a IA770 voice mail. When you call an extension, it goes to cover and then calls the covering extension. The covering extension rings and covers and then goes to voice mail. The subsricbers won't go to voice mail? Like the mailbox isn't seeing the digits on...

I am able to dial France which is a 14 digit # But when I dial England which a 15 digit # i am getting a wave off tone from the BCM I have all restrictions set to the Default setting 02

Does anyone know the Monitor Password for winspm

We've loaded all software, and configured IP Address etc. on CCC, and we still can't get reports or the PC wallboard to connect? Delta server and CCC services are running and started. We've rebooted. Anyone familiar with CCC set up? This is our first one. thanks. whistle

I am not using any IP sets at all. They are 5420's. The book said to use 1151b1's and they sent us 1151c1's cause the 1151b1's were discontinued. I am using the right cables provided from the Vendor on this as well. Do you have any other suggestions on how to make this work? Is there any...

I tried dialing 6600 and that still didnt work and it wasnt responding. Should I make an additional short code? Can I make an additional short code that would make 6600 work? I could live with that.

IP406 v2 rel. 4.0.07... Incoming calls are coming from a PRI sending 4 digits. Incoming call route for digits 7000 destination is VM:DayAA. Created a module in VM Pro named it DayAA. Calls go to the AA and flow correctly when called from within a short code in the system. When an...

IP406v2...release 4.0.07 Having trouble with direct extension transfering off the A.A. Used selector code 6 action was dial by number and my extension range is from 300 Hunt groups 600's extensions...just want to transfer to extensions. Call is being answered and being put on hold...

The power supplies 1151c1's don't seem to be working properly or at all. Used numerous power supplies with different phones and still nothing comes up. Using the proper wires for this as well. Any ideas or solutions to help resolve this issue?

No, The forwarding feature must be turned off from the phone...

Thanks for the advice. I had to default the switch. And redo the upgrade....

I was upgrading A IP403 From 1.4 to 2.0 And It seem that DHCP feature was lost. Please help vm not working, can't find ipoffice with manager.....

Send me your e-mail address and I can give an excel sheet with the port #'s on them Whistle779@verizon.net