Search results for query: *

Also, the reason I have to disable the Firewall/ICS service is because with it enabled, svchost continually eats up one of my two processor cores. Yes, I should probably reinstall Windows...but what a pain. I'm trying to hold off until I build a new machine when Nehalem comes out.

I have actually resolved this. A while back, I had disabled the Windows Firewall / ICS service. So I re-enabled it, disabled our AD policy for the firewall settings, rebooted, re-enabled the policy, rebooted, and turned off the service again....somehow...*poof*...I can once again connect to my...

I just started having this issue where I can't connect to my workstation from any other box -- RDP, file shares, PING....nothing Wireshark shows incoming SYN requests, but that's it. I have no problems RDPing to other machines or connecting to file shares etc. Updated by NICs to the latest...

Could someone please verify if this server has a true full-length expansion slot available? That is, will it accomodate a card that is 31.2cm long? Thanks very much.

I would like to route messages that come from the outside to a gateway address. For example, when someone sends a message to alarms@mycompany.com, the message should be routed to [OCTELAN:1234] so the Exchange gateway that handles that address type can process the message. I have tried routing...

Here's something that used to work for us before yesterday, and I don't know what changed. Our fax server sends SMTP messages to our users by only specifying the sender address as "FACSys Fax Connector@". As I said, this always worked. Now, Exchange 2003 is rejecting the messages with the error...

I would like to be able to open up a new window on a network file share (a DFS root specifically) and use alternate domain/username/password credentials that are entered by the user as part of the script. Is this possible? Thanks.

Thanks very much Patrick! I appreciate all your help. Joe

Patrick, Sorry for the confusion. I actually have Metaframe 1.8 Service Pack 2 (with FR1 installed). In this case, should I be entitled to an upgrade that supports Win2K3? Joe

Patrick, I had thought about ditching Citrix, but isn't the screen performance better (more efficient) with Citrix vs. Windows 2003? Do you know if FP3 is a billable upgrade? I see they have service packs 3 and 4 available on the web site, but this isn't the same thing, is it? Thanks! Joe

What will happen if I upgrade my existing Metaframe XP 1.8 FP2 server, running on Win2K, to Windows Server 2003? Will it work? Thanks.

Yes, I know that 100Mbps will give you 8-9MB/sec. My point was that my personal workstation achieves that throughput, while the PC that's connected through the 1711 to our network gets only 1MB/sec maximum. I'm wondering how to enable full 100Mbps functionality through the 1711. The devices that...

Nope. I just tested throughput on my machine, which is connected to this switch: 8-9MBytes/sec on average

Nothing is set to 10. There are other devices connected to the same switch as the WAN side of the 1711, and they can transfer at 100MBit.

I have been testing throughput on my 1711 router, and it seems to be limited to 10mb/sec. I've tried setting the "speed" parameter on the interfaces, but even if I force it to "100", file transferes are still locked at 10. Any ideas? Thanks.

I would like to be able to use my 1711 router without NAT. Basically, I just want the device to route between two networks: 20.0.0.x on the inside and 10.0.0.x on the outside. I have no NAT rules, no static routes configured; just VLAN1. I am able to communicate fully from the 10.0.0.x network...

I was on the phone with a Cisco tech for about 2 hours. You know what the problem finally turned out to be? Proxy ARP had to be turned on for both interfaces. Once that was done, everything worked perfectly. I don't pretend to understand why this setting is necessary. Thanks again for your...

It may be that Outlook 2003 requires that you use Cached Mode to get the kind of performance you were used to having.

I'm running Outlook 2003, and I'm having a lot of strange problems. Here's a rundown: 1. I cannot add a personal folder file. When I try to do so, the only thing that shows up in the selection of storage types is "Microsoft Exchange Server" 2. If I try to add another mail profile, I get the...

Thanks! Here it is: !This is the running config of the router: 20.0.0.1 !---------------------------------------------------------------------------- !version 12.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone...