Search results for query: *

That's great, thank you. I have the password, it's just the IP address to access it via the PC programming that I need to retrieve.

Hi guys, it's been a while. Is there a way to have a TDE-100 give up its IP info including address, netmask, gateway etc via the TUI using the system admin password? Or is it retrievable from the SD card? I haven't been to this site in maybe three years and their network has changed as well as...

Hi all, I'm trying to set up a mailbox to forward to an outside number using the following method: UM Configuration > Mailbox Settings > Call Transfer Sequence (set to "Other") then in the next field I put in the "F" for Flash, followed by the number to be dialed, then "D" for disconnect, as...

It's a T1, and somehow it's programmed so that certain channels ring certain trunk groups and appear on certain buttons. This is what I can't figure out.

Everything else is fine. DID, voice mail, mesaage waiting light, BLF... Yes, wired for 4 wires.

I think I tried to set the ring tone in Station Programming mode. It beeped back at me as if maybe I wasn't allowed to do that?

No, how is this done please?

I'd be interested to learn how you did it. A Flash string in the transfer field on the TVA50?

I don't remember if I tried that. It seems to me your only option with copper lines is either to use the CO flash/transfer and release (if your phone carrier supports this feature) or a supervised, manual conference call.

First, let me just say that I have been trying to get this customer to upgrade FOREVER. That said, they have their T1 channels broken out into trunk groups, which then show up and ring on specific buttons, depending which DID has been dialed. All this programming was in place when I inherited...

Panasonic's official statement is that this will only work with PRI (which the 50 won't support) or SIP/VoIP trunks. I've never been able to get it to work on POTS lines and I've long since stopped asking why.

Hello, I'm wondering if anyone knows where a copy of the PCAS/Manager software for the Panasonic 576 might be found. The link on www.dbs576.com seems to be dead now. I'm surprised the site is still up at all, really. Thanks in advance for any help.

Thank you all for your responses. Got the word late yesterday, the project is being scrapped. Thanks again!

That did not work, now we are looking to see if the Firewall (Sonicwall NSA-250) might be resetting the connection. Any experience with this?

I think I need more information than that. How can I program the existing voice mail ports to be DTMF as opposed to MCI ports, or is there no distinction? Also, is there a way to program a key to auto-login to a user's mailbox? I should say we're using the MAT utility for system programming.

NEAX 2000 PBX, old voice mail system ("Voice Support"?) is dying. I want to replace it with an Innovator PC-based voice mail, however I don't think the existing MCI connection will work properly with the Innovator as it's designed to support API connection only with Panasonic PBX. So it has to...

Do I set it to None, does that disable it?

Hello all, I have two TDE200 networked together using Virtual SIPGW boards via VPN. Works great, but at exactly 15 minutes into the conversation, the connection is severed. Does anyone know where this timer is defined in the PBX, if there is one?

So a camera must be linked to a doorphone to appear in CA? Can you view the camera via your contact list, even if the doorphone isn't ringing? Do you know what model cameras are compatible?

Some of the brochures and documentation for the CA software on the KXT and NCP systems state that Panasonic's network cameras are in some way able to be integrated into the CA client interface. I just installed CA Pro Version 4 on my 64-bit Win7 PC and connected it to my sales/demo NCP500, but...