Search results for query: *

I need to programm ATEUS GSM Gateway BRI (TLU79)to MD110. ROCAI:ROU=15,SEL=7110000000000010,TRM=5,SERV=3100000010,TRAF=00151515,SIG=111110000031,BCAP=101100; RODAI:ROU=15,TYPE=SL60,VARC=00000204,VARI=05400000,VARO=46410000; ROEQI:ROU=15,TRU=2-1&&2-4,EQU=2-1-60-01; I programmed ROCAI, RODAI...

How can I down grade NIU firmware from R16 (R16A.MX) to R6(NIFR6A.FW).

I have MD110 BC12 SP6. It is a two LIM without group switch.The call back feature does not work. When you activate a call back either on busy or no reply, you get the procedure executed, but you never get call back afterwords. Any idear on what could be the problem.

I could not make a call between the MD110 and PB. What parameters do I need to programme in MD110 to make this work. NANSI ROCAI RODAI ROEQI RODDI RINII RIANI If I did not list the required commands please advise me. RGDS.

How can I create an Individual Authorisation code that can be secret, such that the code cannot be printed with a command in the system.

What are the requirements for initiating a central operator for three Exchanges tied together say A, B & C, with the Operator residing at A Exchange.

I have BC21.1 SP05 and when I activate a call back on a busy extension, I get call back immediately I drop my phone even when the extensio0n I called is still busy. The system Is a two LIM without group switch. It happens even in extensions located in same LIM. It happens in both DTS and ATS...

Four LIMs or there about. Thanks.

How can I add a LIM without bringing the system down.

1) It exists in MD110 its like a patch. 2) Yes it is on analogue trunk.

Can some one help me get NIU Firmware R6A.

How can I cut off users on outgoing Trunk lines after some minutes- say Ten minute (10 Min.)

Thanks. It works fine with 4010, but dose not work on 4000.In fact it works well in all extensions but not for operator. Note that 4000 is an operator. How do I handle Operator setting.

My client has a direct connect from a public switch and the digits being sent from the switch are 00&&99, while the internal directory is 4001&&4099.Meanwhile, he wants some digits 00&&09&80&&99 to ring at the Operator which is 4000.The other digits will ring at the marching extensions Eg. digit...

I am sorry I did not have MFU (MSU/MRU). When I introduced the MFU card,I was able to make calls between my connection in the system ( Md110 to MD110 Loop test) For the connection to public exchange,the traffic that is working is incomming. If I make external call, it keeps silent and times out...

I have some questions on the issue. a)Can I connect 2 MD110 systems using MFC R2 and what Parameters. b) Can I make a loop test on the same system (in then same LIM and or different LIMs in the same system). c) The coonection I made from ERICSSON MD110 to SIEMENS Public switch (PSTN) using...

The country is Nigeria.

What parameters do I use (ROCAI,RODAI,RODDI) to program DID E1 link between MD110 BC11 SP12 to a PSTN switch using MFC-R2 (TLU 20 ) (TL30).