Search results for query: *

Hello guys, Now and I have got an HFA firmware, CP600_E__HFA_V1_R3_9_0 I managed to install it on my CP600, but it does not has a telephone functionality; no dial tone, cannot be called from other subscribers, etc. Is this what @LoPath was talking about? and if not, what can be done? I have...

sbcsu: Great! Thank you.

Okay, Can you tell me how can I download the latest firmware (V1 R2.8.0)?

LoPath: will try your advice. Thank you. xs650: Great! Thank you.

Hello guys, My company has bought around 10 CP600 phones, and it was discovered that all the phones are SIP. (V1 R1.7.0 SIP 161129) So, many of the basic features do not apply,Callback for example (i have also tried to callback a SIP phone from HFA, and it did not work). So, I am asking for...

Can you please add the 60 & 80 SIP? Thanks

I need to configure a SIP Link between my HiPath 4K and my OpenScape Business V2. The thing is, I have problems in both of the configurations. - For the HiPath 4K: I have the configurations, for configuring my STMI card to operate 120 HFA phones, 120 SIP phones and 10 SIP trunks...

Okay thanks. Is there a way i can deactivate this feature globally? As it makes problems

Okay, I do not know if it is a problem or not. But when I program a key on an IP set (OpenStage 80) as a repdial key with LED (say 3000), if someone is calling 3000 (and it is flashing in my extension), if at this moment i press the repdial key, i get connected , not to the 3000, but to the one...

Okay will try it. But do I have a wrong configurations firstly? this is my TACSU PEN | 1-2-25-1 | | --------|--------------------------------|--------------------------------| DEVTYPE |...

It's a HiPath 4K V6

Hello, I have a DID service over DIUT2 card (analog) that I need to display caller ID over it. I have arranged with the service provider, and they have told me that the feature is now running, but I still get the "DID" message instead of the caller number. Is there a parameter that need to be...

@togtek: The license is fine, the problem was that the OpenStage it self was registered fine to the OpenScape, but the call could not be established. Once I upgraded the version of the OpenStage, it worked fine. Thanks a lot :) @xs650: Thanks alot pal! It worked!

The thing is, when I connect my OpenStage to the Openscape, the phone get registered, but the call does not get established. It always gives my that the phone is busy. So after deeper digging, I found out that I need to upgrade my OpenStages to a newer version.

I need to upgrade my OpenStage 60 HFA phones to the latest version compatible with my OpenScape Business X8. After checking the compatibility, I found out that I need HFA V3 R0.23.3 I cannot find the software, if anyone have it. And I need also the steps of upgrade (in details please). Thanks.

In my HiCom 350 system, for retrieving the REGEN file, after I make the Vegas and Regen steps, when I click the Start Local File transfer window, I get an error of (connection not accepted). Is there some parameter that needed to be entered?

Ok, thanks a lot. One last thing, if there are recommended applications have been used (over android or iOS). Again, thanks a lot.

Hello, I would like to register a SIP softphone (from mobile) to my HiPath 4000. but all the applications on the mobile keep asking for username and password. What username and passwords are these?

OK, thanks for your replies. But I still need to get some points: I get that my board STMI4 - Q2324-X500 can support 60 channels. So, I can register my 120 HFA phones and 120 SIP phones, but only (according to the below configurations) 30 SIP calls and 30 HFA calls at the same time, is this...

Hello, I have an STMI4 - Q2324-X500 card that will be used for HFA, SIP phones and SIP Trunking. The thing is, I do not fully understand the parameters of the BFDAT command. I know that LINECNT is used for the number of circuits to be configured, so that if i want to configure 60 SIP phones...