Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Dial-back on a BRI to a single NT Workstation!
Sorry to make this a 2 parter... but if you want to use caller ID.. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_c/dccallid.htm has some very good information.. Ciao! Andy }:-) -
Dial-back on a BRI to a single NT Workstation!
Well, to make a long story short try: 1. http://www.cisco.com/warp/public/793/access_dial/async_ppp.html For router to PC callback.. and 2.http://www.cisco.com/warp/public/793/access_dial/isdn-ppp-callback.html for ISDN callback... G/L! Andy ;-) -
Which ports to allow IP Printing!
Only 515... depending on the application you are using, you'll have to decide on tcp or udp... Ciao! Andy -
How to connect
Is this a connection to the router or through the router? -
NETBIOS BLOCKING ON ETHERNET NETWORK
Actually, NetBios will never be routeable, since it is a layer 5 protocol. TCP/IP resides at layer 3. It's a small 2 layer encapsulation that takes place. (NetBeui is a layer 4 protocol) andy -
Configuring 2621 To Use Proper Time
Actually, NTP sites on the InterNet use tcp, not udp. And most likely it will be sntp (port 580, regular ntp uses port 123). Hope that helps :-) Andy -
Secondary Address Frustration
Jay, Depends on how you want to run things, and what kind of cisco eqipment you have. The best bet is to have the external interface of the router (that goes to the i-net) have the real world address and the internal interface have a private 10.10 address. But from what I'm guessing, this... -
NETBIOS BLOCKING ON ETHERNET NETWORK
Brian, Mike is correct, also try the following: Turn on udp forwarding of ports 137 and 138 on the routers. This is how you do it: ip forward-protocol udp 137 ip forward-protocol udp 138 Then, on the interface enable an ip helper address: ip helper (other ethernet subnetwork address) In... -
NETBIOS BLOCKING ON ETHERNET NETWORK
Bridging would really only be used if you have more that one router on the network. I can't see why that would be a problem. Try this first (if you haven't done it already): Goto a command prompt, type net diag. Answer no to the question: Is Microsoft Network Diagnostics currently running... -
NETBIOS BLOCKING ON ETHERNET NETWORK
Actually, that's not entirely correct. NetBeui is not a routable protocol as lars stated above, Neither is NetBios because Microsoft, in their infinate wisdom decided to keep NetBios at layer 5 instead of layer 4. (OSI model) You are correctin the fact that NetBios piggy-backs TCP/IP, but in... -
Export IOS Config to Text file
Or if you want to even get MORE technical, setup a TFTP server somewhere on your network and:<br><br>router> copy run tftp<br><br>Put in the TFTP server's IP and BOOM, text file. :) -
CLI Question
Most companies make their CLIs propriatery, even though you might find similarities between two IOS's (ie Cisco and Bay Networks) they are greatly different. Unfortunately... wouldn't it be nice if they were the same? Wow, an actual standard! ;) -
New 10/100 switch and samba doesn't work
You might want to check the switch to determine wether or not it is allowing broadcasts on all ports, or at least the 2 you are using. I know Cisco switches will not (by default anyway) pass broadcasts on to all ports in the switch.<br><br>Try going into the config console on the...- Kerzon
- Post #4
- Forum: Linux (server)
