Search results for query: *

i'm having a similar issue From (xxxx PBX extension)@(xx.xx.xx.xx SBCoutside interface) To 0046171121674@(xx.xx.xx.xx SBC outside interface Source IP 185.53.88.161(Cloud star Netherlands)

is there a way on the 242 option to set groups for phones and also get certificates prior to using the AADS or utility server?

8.0 cm

UPDATE: phone button layout is normal 1 through 8 unless you are using half screen mode then they are 1,3,5,7 on left and 2,4,6,8 on right I am running SMGR 8.0.1 and phone fw 4.0.1 and i cannot confirm the fact that 4.0.1 puts those features on the forst page without being favorite. as of...

New phone firmware came out 3/8/19 didn't see much change

So working with the J1xx series phones I've found a lot of gothchas. TLS has to be used to get buttons. Button layout is not standard buttons 1,3,5,7 are the buttons on the left side of the screen. 2,4,6,8 are the buttons on the right side of the screen. if you want any feature buttons to show...

check with your vmware admins if they are doing snapshots that would be the exact outcome

AUS 7.1 can be used it will complain about no license but it will function

thank you both i'm trying to add aes as a manged element for certificate and management purposes. ive looked at both the ASMGR and AES documents but it very confusing.

Has anyone found a good document on adding each individual element like aes to system manager?

avp is very slow and cumbersome

also if you are using ASA (avaya site administration) you can go to the hardware manager page under fault and performance. right click on the board you have in question click on port usage.