Search results for query: *

COOL - I tested it. It does just like you said. Thanks for the help!

Does anyone know how to activate the date stamp, if there is one, on the Embedded mail? It plays the message, then gives the TIME the message was recorded, but no day or date.

Try setting the unit for RFC2833 or Inband under SIP Line. Also, for compression mode, set to G7.11 uLaw. That is the most common trip up I come across. If that does not solve the issue, Maxwell is spot on about contacting your provider. They should be able to tell you how to set your line...

OK ALL - IT WORKS!!!!!!!!!! You folks who told me to build a 0.0.0.0 IP Route - that was the whole issue! Thanks so much to all of you for your help! I was about to chuck this thing out the window but now it works great!!! Thanks a million!!!

Hi guys. Sorry I am so late to get back, but could not get on the 'net this morning. Here are some answers... 1) This is my first SIP install. 2) I am in Denver, CO 3) I did NOT say the 500 was bad - I needed HELP bad. 4) I was referring to a Dgtl Sta 8 card instead of a DLC8. I figured...

Hi all. I have an IPO500 that I have been trying for months to get to work on a SIP trunk. I have tried with three different providers. The 500 will not even attempt to register with the provider, and any ping attempts in SysStat fail. Yet, I can ping it both internally and on the public...

I have a VMPRO for an IPO-500 and I have it set up to send emails through MAPI using Outlook 2003 using our Gmail account. I tried SMTP and it won't work - whatever... My problem is that it sends the email with the attachment in the .dat format instead of the .wav format. Is there any way to...

Thanks, Mitch. Can i just replace the 7404, 765, or 2401 - or all three? I might be able to find these used with the software already on-board.

Hi all - I have been working on Definity's for over 10 years and this is the first time I have come across this one. I have a Definity with a 2404/765/2401 Processor setup that we bought as a unit to test circuit packs and 7400/8400 sets. When I log into the unit with CRAFT, it returns the...

Hi all - I have a real witch on my hands. I have an IPO-500 5.0.8 with a VCM 32, all appropriate licenses loaded, etc. I am trying to build a SIP trunk from DidForSale.com and I am having a heck of a time with it. Our network is running behind a NetGear ProSafe VPN Firewall 50 with NAT...

DUH!!! I set the IP address and it works just fine. Thanks for the reminder. :)

Thanks for the quick replies - It has been upgraded to 5.0 and NO I did not change the IP address from the default. Should I have? (Forgive my basic question in advance... :b)

Hi! I need some help on this one - I have an IP500 connected to a SoHo 100-T network. When I first connected it, it was discovered in manager just fine. Once I loaded my settings into the 500, it is no longer discoverable in manager. If I default the 500 to factory settings with the reset...