Search results for query: *

I wasn't confident about FBA vs FBD because I built ports NEW and didnt put in FBA. I went and checked anyway. FBD is in the CLS. For anyone who wants to see this DES HUNT TN 004 0 00 05 TYPE 2008 CDEN 8D CUST 0 FDN TGAR 1 LDN NO NCOS 0 SGRP 0 RNPG 0 SCI 0 SSU XLST 0 SCPW CLS CTD FBD...

I have an Opt 11C Rls 3, NI2 PRI. When an analog or digital extension does not hunt, instead of the D-channel returning a cause code #17 User busy back to the Carrier, the PBX D-channel sends Cause Code #21, Call Rejected, therefore the Carrier plays a recording indicating that "the number you...

ESA and TON:NATL issue on D-channel message I have an Opt 61C Rls 3. Customer wants to use ESA because of the OSN capability, however, when I turn ESA on, and send the call out Route 0 (Windstream PRI), the TON: is NATL and Windstream wants to see LOCL. The first thing that came to mind was...

We want to run a Corporate Directory Spreadsheet but we want to exclude some of the extensions (some of the VIPs). The guy that used to do it isn't there anymore and the OTM was rebuilt from scratch last year. Is it under the Directory Options for each Station? Thanks

Back in 2010, Stbernard asked how to program the CTIA. There was no response. Did Stbernard ever figure that out? Do you program a data port? How? Let us know. Thanks

Thank you, that was my opinion. I was hoping there may have been some undocumented routine that 135 addressed that wasn't published.

Is there any reason to run LD 135 in midnight routines on an Option 11C? It's an NTDK20 card, Rls 5.5. If yes, what is it testing? Thanks

No IP set or trunks Less than 20 digital sets. This site has had several power loss lately (and no UPS, grrr). Although power hits could damage multiple items, the first suspect are the PECs. Both part numbers are available to me. The AC as refurb and the AAAB new from Avaya. The AAAB has...

In the older Nortel price books, the AC is listed as RO (reference only) and the only "orderable" part was the NTBB80AAAB. Both are called MSPEC III. I can find ton of AC on the refurb market and NTBB80AAAB is still available new. I have a BCM 3.7 (purchased new at the time) and want to...

I have an old OTM (2.1) to remote access. Not public network accessible, neither is client PC. No WebEx/Lync, etc. Just a modem. Am I resigned to use PCAnywhere?

This was part of a conference by Nortel and not under non-disclosure. It doesn't say much however. But David Downing, general manager for enterprise and SMB communications solutions, did say that its BCM 450, which lets small and mid-sized businesses add IP telephony to their systems, will be...