Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. nbadmin

    Location of NET_BUFFER_SZ file on Windows Clients

    Correct the path is: <install_path>\NetBackup\NET_BUFFER_SZ
  2. nbadmin

    Vxss Security

    It will do all of that for you. But you need to be on MP1 or 2 and request the CD from Veritas. It uses windows and unix authentication brokers.
  3. nbadmin

    No connection to Client

    If it is stuck in connecting and never goes CONNECTED it is a comms issue - make sure the client gets a responce (NB version of Master) from bpclntcmd -sv or -pn (port number). Do you get a byte count from the backup? If you goto restore can you see the backup of the System_State? Look at the...
  4. nbadmin

    Activating zone set - disks offline/online

    Does this imply that if we disable the RSCN on the HBA's they will not pickup zone changes? Are there other implications of the RSCN disable? Thanks again...
  5. nbadmin

    backup data???

    Try; bperror -M "mediasever" -hoursago 24 | grep Kbytes/sec
  6. nbadmin

    Activating zone set - disks offline/online

    I wonder if anyone can advise on this please? We use McData switches and mostly Emulex and JNI HBAs. Every time we activate a zone set we see in the syslogs; scsi: [ID 243001 kern.info] /ssm@0,0/pci@19,600000/SUNW,qlc@1/fp@0,0 (fcp0): Lun=0 for target=6f0413 disappeared or jnic: [ID 170727...
  7. nbadmin

    Restore from tape

    If there is one policy with three schedules check the date range used in the restore. If it is three different policies check that the client names are exactly the same on all of the policies and it is the same being used in the restore. Not sure why your using three different policies for one...
  8. nbadmin

    files /tmp/?????__?.nbu created continuously

    Do you use PATROL with the OTL NetBackup knowledge module?
  9. nbadmin

    Remote Admin Console

    I know this is a fudge but; Try putting the addresses in the 'hosts' files on both sides I know it resolves over DNS but I have had the same issues resolved by doing this - don't know why but it works.
  10. nbadmin

    Throughput Scripts

    You can check the speed after the backup has finished with the bperror command but to monitor the backup you'll need to read bptm log and search for Kbytes/sec
  11. nbadmin

    upgrade from veritas netbackup 3.5 to 5.0

    Beware of VSP (the replacement for OTM) slowing down backups! We had to switch VSP off and wait for MP2. There are changes to the way Windows multistreaming wildcards are used i.e. If you have a stream X:\blabla you'll need to change it to X:\blabla\* which under 4.5 would have created lots of...

Part and Inventory Search

Back
Top