Search results for query: *

I fixed the problem with some oil. lol I also found out that the paper guides are attached to the plastic panel. Its a one piece thing that comes off.

I have the same problem on my C60. My suggestion is to uninstall the printer and software, change the cartridge, then install the printer again. I havnt tried that yet but it might just work. It has something to do with their crappy software that recognizes the ink levels. Also make sure you...

Ok I find out that the Part# for the engine board - 56P1015 is for the 1120. The 1125 Engine board is 56P1005 The RIP board is 56P1192 if you don't have networking on it. (works for 1120 or 1125) After getting the correct Engine Board, everything ran great. I got another printer with same...

I decided to take the printer to the top of a skyscrapper and see if it will fly. lol

Hey gedy, Do you work for XEROX? It seems you are trying to stop people from asking free questions. I have read the responses on the posts you left, and the responses I read said that the person asking the question should pay for a new printer to fix the problem or pay Xerox to ask a question...

The print head costs 699 and I am experienced. Fixing printers is easy compared to fixing a car. :)

Do you bother to read what I wrote? I did all available tests. And I do check the Xerox site. This is the whole reason to have forums, so that people can help people. :) PS I already did the tests you said to do.

I am having an ink problem with an 850. All the ink reservoirs are full. The color that is not printing fully is blue. When I print out a blue page, I get mostly a red page with a streak of blue. I cleaned the sensor on the top silver roller and checked for any chunks of ink on the inkloader...

I am having the same problem with an 850, and all the reservoirs are full. The color that is not printing fully is blue. When I print out a blue page, I get mostly a red page with a streak of blue. I cleaned the sensor on the top silver roller and checked for any chunks of ink on the inkloader...

I ordered the 56P1005 engine board, but the guy I bought it from sent me a 99A2155. It looks the same but it still is not working.

I replaced the engine board and RIP card. Now I get a 902 Error code which means, "Replace Engine Board". Do I have to do something after I install the engine board?

techwrtr2, Can you re-send item again? Exchange Server has been down all week. Thanks

start by replacing the bulbs. If tht doesnt fix problem than replace preheater drum. the bulbs olny cost 5 dollars. check other posts on forums. I described in steps on how to replace bulbs.

where can I get the parts catalog? I looked on-line and they sell it for 100.00. Is there a place where the catalog is displayed free? I download a parts update from the site and when I open it, it asks for a password. Do you know the password?

I need the paper guide that is in the rear of the printer. It is a black plastic roller. Can I also get the part numbers for the two on top. thanks

On step 9 there is a plug connected to the paer/drum heater. It is located and gets disconnected from the right side of the printer.

Make sure you see how it was before putting it back. 1 Ok. Take off the right and left side covers. 2 On the left side take disconnect the head tilt spring 3 Take off the Upper feed roller electric cluth and everything that is with the clutch(Its the clutch that has a black wire and it is...

Thanks, When I went to order the part they said it could work for 1120 or 1125. Thanks again, if I have problems again I will write back. Also, do you know where I can buy the 1125 Service Manual? It seems hat no one has it.

Does anyone know where I can get an IBM Infoprint 1125 Service Manual? I was told by IBM that the service manual has all the part numbers and without the service manual I cannot order what I need. Joe

Is 56P1193 part number from IBM? I called and they said it was the CTL Card. Is that what it is called?