Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. damookster

    Call Forward remotely

    To do this from an off switch phone,you would need the DISA pkg,and use FFC's.Note the DISA package is just another door for toll fraud since it would click back to dial tone from the PBX.
  2. damookster

    Agents being logged out when not at the their desk

    The prompt is RTQO,it can be set to either notready,NRD or make set busy MSB
  3. damookster

    MSDL Ports

    Here is what I see used. MSDL 11 port 0 open port 1 DCH 63 port 2 DCH 53 port 3 open MSDL 12 port 0 open port 1 open port 2 DCH 59 port 3 open MSDL 13 port 0 open port 1 DCH 62 port 2 open port 3 open
  4. damookster

    MSDL Ports

    Could be multiple services,mail could be one.When you do the stat msdl # full it should tell you as below. STAT MSDL 9 FULL GROUP GROUP 0 MSDL 9: ENBL SDI 9 OPER PORT 0 DCH 30 OPER PORT 2 DCH 28 OPER PORT 3 CARDID: NT6D80AB 01 NNTM1831KTAE...
  5. damookster

    MSDL Ports

    In 96 do a stat msdl,this will give you the msdl #'s,then do a stat msdl #of msdl full ex. stat msdl 8 full
  6. damookster

    Set Count

    The LD 81 count is all that are programed in switch,and yes lineside ports are counted as 500 typesets
  7. damookster

    LCI card location within a network shelf

    Yes,acts like an NT8DO4 network card but is for a carrier remote
  8. damookster

    ERROR CODE DEFINITIONS

    At > prompt,not in a ovlay,type ERR code such as ERR BUGXXXX.
  9. damookster

    ring cycle options

    The max ringing cycles you can set your RCO's to is 15,approx. 90 sec's
  10. damookster

    Can't copy phone - get SCH0126

    Does slot 23 hace a ITG card in it?
  11. damookster

    Nortel Meridian VM and PBX - Voicemail system not getting CALLER-ID #

    Are your incoming trunks PRI'S ?
  12. damookster

    Call Display

    Try setting cls. to TDD
  13. damookster

    How can I get -48v DC out of an AC Meridian 81C

    Try x_connecting to an unprogramed 500 port.
  14. damookster

    T1 - Can't Dial 800's + Can't Dial 1 on COT Route

    Toll free numbers should go out your local trunks.

Part and Inventory Search

Back
Top