Call Display

[mlevine]

Hello all,

I have a question. When I build a Supervisor set,(2616 with a OP 81C)the LCD displays "NOT LOGGED IN". Which it should for the ACD nature of it.

The thing is when a call comes in on my regular 2616s, I will show who is calling automatically. On these supervisor sets, you have to hit the display button then the DN key.

In essence, I am trying to see if there is a way to make it so the display pops up automatically, so the "NOT LOGGED IN"" will not be so "static"

Any thoughts? I have included what my template for these phones are below to have tou see what is in my CLS. Thanks!
Matt

--------------------------------------------------------
DES 2616
TN 104 0 03 00
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN 5450
TGAR 8
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD DOS XHD IRD NIA OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUA DNDD CFXD ARHA FITD CNTD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 5450
LHK 2
LPK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
PRI 01
DNDR 0
KEY 00 ACD 5659 0 1006
SPV
01 SCR 7005 0 MARP
CPND
NAME User,Name
XPLN 11
DISPLAY_FMT FIRST,LAST
VMB
VMB_COS 1
SECOND_DN 2005
THIRD_DN 4005
VMB_STATE CONFIGURED
02 SCR 2005 0 MARP
CPND
NAME USER,Name
XPLN 11
DISPLAY_FMT FIRST,LAST
03 NRD
04 MSB
05
06 AO6
07
08 SCR 4006 0 MARP
CPND
NAME PAT MSG
XPLN 7
DISPLAY_FMT FIRST,LAST
09 DSP
10 OBV
11 ADL 16
12 CFW 4
13 TRN
14 MWK 5450
15

 

[damookster]

Try setting cls. to TDD

 

[RBeaudoin]

Our supervisor sets are programmed similarly to yours, in the CLS though we have CNIA, DNDA, CNDA. Yours are all denied, try changing that and see if anything goes.