Search results for query: *

Thats it! Thank you very much. I will make sure we include that header from now on.

Hi, We are using write(file_descriptor, Ascii string, size of string) to write to a serial port in linux "/dev/ttyS0" It works fine in C. However, we are trying to combine some code that is written in C++, and the only problem we have is that these two functions , read() and...

Thank you both, very clear and helpful!

Hi, Im writing a simple telnet VB program that will let me login to a telnet server and run scripts. I have already successfully written the program with activx component. However, for experience, I am going back and re-writing the telnet part using winsock. However, as many people have...

So my question in response would be, what exactly is the argument for the "network " command? is it supposed to be the network that That router has on its interface? RB is connected directly to a network through one of its ethernet interfaces, and it is also connected to RC through...

Thanks!! That was simple!

Hi, I seem to be having difficulty understanding the CISCO documentation for configuring RIP on routers. Following the CISCO documentation at http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt2/1cdrip.htm I can not seem to get my routers to share the routing...

Hi, I want to be able to open an external program with VB and send it a file. I know that the shell command works, but I want to do something more along the lines of having the user double click a file in a FileList and then the default application installed on the users machine for opening...

This is for a WINDOWS system, not unix...sorry forgot to mention that

Is there a way to write a script that will login to a Telnet server and do other things? I'm trying to find a way to telnet into a server and change configurations from remote locations by just running a simple script or batch file (for users to run). Any ideas?

Hi, I have a catalyst 3550 Switch. Multiple workstations are connected right now to it, and it goes to a 2621 xm router that connects to a larger network. For some reason, one of the workstations port LEDs will flash Green/Amber/Green/etc... when I try to transfer large files, >1MB. The...

Hey, I have a TDK DVD/CDR Burner Drive, and it does this wierd thing where if I push the drive open button it wont open, the light will come on then turn off. Then I do the whole "paper clip in the small eject hole" thing and it will open and then close properly...However, then ...

To all : Thanks for the advice, I will make sure the gateways are set for both networks. Also, do I need to enable ip routing? ie. "ip routing" at the config prompt? I'll let you know what happens.

Hi, I have ISDN BRI interface on a two Cisco 2621xm routers. The routers call each other, and I can pass data between them both. Question: Can I have dialer load-threshold AND ppp multilink set up at the same time? Here is my config for the BRI interface, with the numbers excluded...

thanks for the reply, It seems that I have never set up rip successfully. What would be a sample config for the above setup? the Cisco examples for RIP don't seem to work, but then again I could interpret the commands wrong. Can someone give me a sample? this is what I would do: config t...

Hi, I have two subnets, each on a seperate Fast Ethernet interface of a single Cisco Router (2621xm), I want them both to be able to communicate with each other. Here is a bad ascii picture of the setup ---------------------------------------- | Cisco 2621xm Router | |...

Thanks! That did it!

Every few minutes one of these messages will pop up in the console: %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/foriegn_router-confg (Timed out) %Error opening...

So the answer is...yes! I'm doing it right now and its fine! yeah the lines they come with are never long enough :P

This is the trace route from a workstation in network A to the ISDN BRI interface in router B across the ISDN connection: 10.16.10.153 is router A's fastethernet connection to network A. 172.17.20.2 is router B's BRI interface to the ISDN line. Tracing route to 172.17.20.2 over a maximum of 30...