Search results for query: *

I also am having problems installing a surestore DAT drive on my linux DL360 server. The device shows in bios ID no 3 (it is installed on a seperate SCSI controller) This controller was picked up during the hardware discovery phase after installation. However the backup device does not show. I...

I simply want to set it up with the Partial E1 line MCI are providing us with. Its simply DATA no voice and its in Australia thanks for your help MCSE,MCSA, NCSA,MCP+i,MCP

Hi I have a Cisco 2621 router with an E1 Controller card. This is to be used with our partial E1 line in Australia. Problem I have is I have never configured one of these cards before. I have looked on the Cisco wbesite but cannot find anything to tell me exactly how to confgure. Any help would...

Hi, I am trying to set-up L2tp from an iPAQ to a NetScreen 25 I have completed setting up Windows 2000 & XP remote clients using the native L2tp client rather than the NetScreen remote client (after adding the registery hack for Windows 2000) the problem I have I cannot find a way of making the...

Have you allowed TCP 1723 and GRE throught the router ? MCSE,MCSA, NCSA,MCP+i,MCP

I have writen a best practice document if your interested, e-mail me @ ashley@mothershaw.com MCSE,MCSA, NCSA,MCP+i,MCP

Hi, I have a question regarding certain user permissions within Windows 2000. We have a software applecation that is used over the web, the problem is everytime you use it it downloads the Active X controls required for it to work. The only way this will work is for that user to be either a...

1600 routers do not support DSL, you need a 1721 or 2600 both have to be specified with the correct ISO MCSE,MCSA,MCP+i,MCP

Thanks that worked a treat MCSE,MCSA,MCP+i,MCP

...range given to me by the ISP. I know I need to set-up bridging but do not know where to start. so ADSL WIC when dialed up gets an IP address of *.*.17.65/28 my range is *.*.17.64/28 so I have given the ethernet interface an IP address of *.*.17.77/28 Is there anyone out there who can help...

Hi, I wonder if anyone can help, I have just taken over a network and I am not to happy with the topolagy. To give you an idea we have 6 offices connected by leased lines using Cisco 2620 routers we can call them router 1,2 & 3 router 1 has has 4 serial interfaces with two offices hanging off...

yeah its exists as mentioned above I have now fouund a solution by copying in this line FEATURE(`relay_local_from') in place of the one I have which I think looked like this FEATURE('relay_local_from') not much deferance I'll grant you but this is what fixed it thanks again for the help Ash...

OK I read through lots of previous posts and foudn a solution from RhythmAce's I added this line FEATURE(`relay_local_from')dnl to my sendmail.mc file I have looked very closly at this and am buggered if I can see the deferance to what I had. Clearly there is something as it works now thanks...

Hi, I have set sendmail up on a linux box and I would like to control relaying. I am running Redhat 8.0 with the version of Sendmail that ships with. The feature I am trying to use is FEATURE(relay_local_from) the problem I have when trying to use this is I get the following error message when...

Hi All, I run a Linux RedHat 8.0 server, firstly is was on our live IP range but because it got hacked a couple of times I thought I would put it behind our company firewall. So I decided to reload the OS and upgrade at the same time (it was running RedHat 7.3) I gave it static ip address on...

well would you believe I can receive e-mails from anywhere except hotmail & microsoft (I have a freind who works there) there is no denies for MS or hotmail in the access list so no idea why they can't send.... MCSE,MCSA,MCP+i,MCP

Hi All, Well I seem to have worked through nearly all of my problems, the last one I have to crack is receiving e-mail from the outside world. my set-up is a linux box at work sat in the public address space, this machine also acts as the internal DNS server for work. We have an internal...

are you planning on running firewall on the Linux box or the windows box ? what type of internet connection do you have ? Linux is quiet good at acting as a firewall, if your going to have the firewall on the Windows box then I would go for winroute Pro. MCSE,MCSA,MCP+i,MCP

its certainly not a firewall issue for the perpose of setting all ports in and out are allowed and if you peform an NSLOOKUP its live IP is returned. Also I can ping and telnet on port 25 to mail.mydomain.com from my dialup account at home. this has made me rule out DNS as an issue...

I have sorted the problem of remote users not being able to send. the problem I have now is receiving. I'll explain the full set-up so everyone understands. my Linux box is at work sat in the DMZ using a live IP address. We have an internal network using the '10' network, on this network we...