Thanks marty5261
Printer says 73% maint. kit life remaining, so I should be good for a while. Is there a way to clear the 30 day warning message display?
rtp59
My Phaser 850 informed me that I should replace the maintenance kit for preventitave maintenance with in 30 days. Since my printer has the extended maintenance kit with about 50 % of the prints left is this necessary? The supplies information page says that either kit (standard or Extended)...
2trepxe
As it turns out the thermistors that this error code refer to are built into the print head they are epoxied onto the back of the faceplate and are NOT replaceable. If you get this error your printhead is toast. Fortunately I was able to locate a used parts printer that had a working...
ifixprinters
Well it looks like I will be looking for an refurbished/used printhead. I wish I had your 10 ft pole. It was an E-bay purchase but fortunately I didn't pay much for the printer. The Seller offered to have me ship it back and he would refund me, but shipping is almost as much as...
Thanks Marty5261
The cables all seem to be OK on the printhead-ink chamber assembly there is a yellow bundle of cables that connect to the 4 heater coils in the ink chamber the heater coils seem to be protected by a temperature protection device the yellow wires attach to one side and the white...
Thanks Jim
The Thermistor would be the heating coil ribbon behind the metal plate in the Printhead? I will check it out, along with the wires. I was afraid it had to do with the circut board being toast.
Randy
Can someone please tell me what this error code means, I purchased a used 850N That arived printing black only with no error codes. Diagnostic test page had only black no color bars. There were black inksticks in the yellow, red, and blue tray slots, and at some point ink had been spilled...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.