Search results for query: *

Hi! We have 2 switches connected with one single 100Mbit line. For normal gaming this is enough, but when someone copies a large file like a movie we have lag. A nice solution would be QoS packet management for specific TCP ports, and I've seen commands like service-policy and priority-group...

It's hard to say which color belongs to wich number (cables may be different). The best way to check it is to use a multimeter and check it pin by pin (so pin 1 at the RJ-45 must give a result on the multimeter with db-9 pin 8). For numbering on the RJ-45 you may use this image...

Hi! The pinout provided by ChicagoJim only contains the rollover cable, you also need a DB9 to Rj-45 Conversion. I had the same problem too but teletec1052 gave me this pinout for an "all-in-one cable" and it worked for me. RJ-45 DB9 1 - 8 2 - 6 3 - 2 4 - 5...

HI! I'm trying to play with configurations of a catalyst 2900XL switch, but i'm afraid to screw things up. Is there a sort of an emulator like a virtual switch (so i won't screw up the real switch)?

My cable problem is solved... (using 1-8,2-6,3-2,4-5,5-5,6-3,7-4,8-7) My experience is you have to make a "connection" first and then you have to power up the switch (I made the fault while trying the alternate pinout) after that you should see some stuff in the screen.. and when...

Whooooohooooooo!!!!! Thank you all!!!! (especially teletec1052) I've been trying some combinations.. rechecked everyting... and Finally @ 20.18 local time (GMT +1) i saw the wonderful bootupscreen of the switch... :) I don't know why it didn't work out the first time, but now i can discover...

I know (i wasn't clear enough).. cisco provided the schemes(see the link), but i generated an "all in one" cable (rollover & DB-9 in one).. but maybe i made a fault.. thats why I wanted to know how your pinout was... the scheme: Rollover RJ-45 to DB9 OWN...

netintern, I assume you have the origional (correct) cisco cables to connect to your console .. could you give me the pinout from the RJ-45 (switch side) to DB9 (computer input)... so i'm able to reproduce the cable to make sure i'm working with the right equipment ? (most of the times i'm...

Just tried the pinout wich teletec1052 proposed.. i tried all possible baudrates in tera term but unfortunately it did't work out :( (hyperterminal gave also no results) so i think it is the same problem as netintern's problem in "No IOS through console...help!!!" Thanks for your...

Maybe that pinout will work.. but i have to solder the cable again (whoow it's a huge amouth of 8 pins :P ) so i want to try this first: "While the power cord is out hold down the "Mode" button, reconnect the power cord to the switch. You can release the "Mode" button a...

Hi, Also got the same problem with the same type switch (WS-C2924-XL-EN).. i tought it would be our homemade cable... but it seems more owners have the same problem so it isn't the cable.. (so my posted topic is off topic).. I also used win Xp , 2000 and Me (hyper terminal & Tera term)...

Thnx for responding, I used the scheme from the cisco site (see link) The Scheme Cisco provided Rollover RJ-45 to DB9 OWN Generated All in one Signal RJ-45 RJ-45 DB-9 Signal RTS 1 8 8 CTS 7 Not con 2 7...

Hi! We are a Dutch LAN party organization called Onfrag, since a few weeks we are the proud owner of 2 Cisco catalyst 2900XL switches (WS-C2924-XL-EN)(IOS 12.0.5.1). Because they were second hand there were no supplies included (and we are non-profit) so we had to build the console cable...