Search results for query: *

burt, NATing is overrated :) Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

To create a default route you would have to have the following in the config: ip route 0.0.0.0 0.0.0.0 [ip you want traffic to go to] to propagate it into OSPF you would have to include the network 0.0.0.0 in your OSPF config. This normally isn't done, default routes are normally propagated...

Hummer, if you are running 32M DRAM you may want to upgrade to 64M, or find a smaller IOS. We have a 2621 with 64M DRAM that decompresses 10M IOS's just fine. I tried and tried to find a 2600 that runs 32M DRAM on our network, but couldn't :( Ben Boyd Network Engineer/Programmer/Student...

66.88.120.0/24 basically means 66.88.120.1 through 66.88.120.254 Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

A reputable paying proxy server site: http://www.intl-alliance.com/ssh.html Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

don't you love windows? it will spool and waste 32GB of RAM. yay Microsoft!!! Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

hehe, yeah. Sorry, was in a 7200 at the time :) Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

Loopback config: conf t interface Loopback0 description Loopback for OSPF router-id ip address 172.16.10.3 255.255.255.255 router ospf 1 router-id 172.16.10.3 end Ben Boyd Network Engineer/Programmer/Student Windstream Communications JNCIA, JNCIS, CCNP

If your config is really long and don't feel like logging a session with term len 0 and running the 'sh run' you could copy your config to a tftp server: [code] copy disk2:running-config tftp: Address or name of remote host []? x.x.x.x Destination filename []? config.cfg [code] Ben Boyd...

You will have to do something very risky we only do when absolutely necessary. Delete the current image and boot image, squeeze the flash, then tftp the image up. It's a great idea to not reboot the router without an image :) Ben Boyd Network Engineer/Programmer/Student Windstream...

this is done easily with what he said above: conf t ip route 0.0.0.0 0.0.0.0 Gateway route-map static-to-bgp permit 10 set orgin igp router bgp X redistribute static route-map static-to-bgp exit hope this helps Ben Boyd Network Engineer/Programmer/Student Windstream Communications Linuxbox...

You can use SecureCRT. Whatever terminal program you use, you'll have to enable logging (and log the output to a file), within SecureCRT it's under the file menu, "show tech" is normally much bigger than our session memory limits. Ben Boyd Network Engineer/Programmer/Student Windstream...

ATT's route server sees and prefers it's own session with you as the best hop, I'm guessing other ISP's trust L3 over ATT. I tried from Sprint's looking glass and they go through your L3 connection. ATT wouldn't accept L3's advertisement and L3 wouldn't accept ATT's advertisement because they...

can you post a sho int again (after you had cleared them)? the 106 & 88 carrier transitions from the previous one sounds a lot like physical issue...

Easy Failover: add a higher metric to the default route on the 2nd line (wireless) ip route 0.0.0.0 0.0.0.0 (t1 interface) (other side of t1 interface) ip route 0.0.0.0 0.0.0.0 (wireless int) 50

agreed... btw, love the banner Ben Boyd Technical Writer/Programer/Student Linuxbox Server Stats: 700mhz, 1024 MB RAM, 120 GB HD, Fedora 3 Laptop Stats: 2.0 Ghz, 1024MB RAM, 40GB HD, Windows XP Professional Desktop Stats: 2.6 Ghz, 2048MB RAM, 3 x 120 GB HD, ATI Radeon x800 Pro, Windows XP...

thanks, worked great! Ben Boyd Technical Writer/Programer/Student opspeedydude@hotmail.com Linuxbox Server Stats: 700mhz, 1024 MB RAM, 120 GB HD, Fedora 3 Laptop Stats: 2.0 Ghz, 1024MB RAM, 40GB HD, Windows XP Professional Desktop Stats: 2.6 Ghz, 2048MB RAM, 3 x 120 GB HD, ATI Radeon x800 Pro...

Private Sub Workbook_BeforeClose(Cancel As Boolean) Dim r As Range Dim variableType As String Dim awb As Workbook Dim BackupFileName As String Dim i As Integer Set awb = ActiveWorkbook BackupFileName = awb.FullName i = 0 While InStr(i + 1, BackupFileName, ".") > 0 i = InStr(i + 1...

How would I do this same thing over MULTIPLE sheets in a workbook? Ben Boyd Technical Writer/Programer/Student opspeedydude@hotmail.com Linuxbox Server Stats: 700mhz, 1024 MB RAM, 120 GB HD, Fedora 3 Laptop Stats: 2.0 Ghz, 1024MB RAM, 40GB HD, Windows XP Professional Desktop Stats: 2.6 Ghz...

thanks it worked great after a few modifications Ben Boyd Technical Writer/Programer/Student opspeedydude@hotmail.com Linuxbox Server Stats: 700mhz, 1024 MB RAM, 120 GB HD, Fedora 3 Laptop Stats: 2.0 Ghz, 1024MB RAM, 40GB HD, Windows XP Professional Desktop Stats: 2.6 Ghz, 2048MB RAM, 3 x 120...