Search results for query: *

Thanks, I heard the fix was on the roadmap for 4.2 but had not heard one way or another. Great news!!

It appears that H323 is your only option. I set up an MGCP gateway on a 1760 with a VIC-2FXO and 4.1 accepts that option. It could be a 2620 IOS issue. bb

Just one extra point, if you are adding a subscriber, make sure the hosts and lmhosts have entries for both the publisher and the subscriber. I am not sure what you are paying for the systems you are using for CCM, but I paid under $700 for an IBM eSeries x306 and I used the original Cisco...

AAR is set up on CCM 4.1.2-SR1 and works properly to redirect calls over the PSTN when the Location bandwidth limit is exceeded to a remote site. However, when the WAN link to the remote site is down, and SRST kicks in, the call from the central site with the CCM gets a reorder response, and...

My guess is not enough commas. When the user dials 255 it will match the destination-pattern, add the prefix digits, and forward the call. You can check this out using the "debug voice dialpeer all" to make sure you match the correct dial-peer and the "debug ccapi inout" commands to verify...

Trying to integrate CCM with SRST failover and CUE. All is working but cannot get the MWI indicator to activate/deactivate when in SRST mode. Cisco documentation i svery slim. Thanks

In order to install CSPS on a linux server, you must have the build for the specific OS you are using, manufacturer and version. You must have the license key or no install. Sorry.

Hi LFA05, I am having the same problem with BARS on an approved IBM x306 server. When I look at the security event log it is showing an error for IUSER_Guest, logon type not allowed. Running 2000.2.7 with SR4, Installed CM 4.01A which is working, but the CCMUser web page refuses to start. I...