Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Untrust VPN to Untrust VPN using Policies
Just FYI, Hub and Spoke can only be done using Route Based VPNs. They have some new documentation on setting up route based tunnels. http://ns25-50-support.netscreen.com/netscreenknowbase/root/public/child/ns10113.htm?- nossah
- Post #4
- Forum: Security, hacker detection & forensics
-
Can't ping trusted computers from NS-5
You may want to try this command using the CLI. ping 192.168.1.5 from trust I have a NS5 and never had this problem. If this doesn't work then we can look at your config.- nossah
- Post #3
- Forum: Security, hacker detection & forensics
-
Netscreen Password reset...
I am not sure if this works but you can try it. 1.Use a pin, and push the reset hole and hold for at least four to six seconds. The status LED will blink amber once per second. 2.Wait for the status LED to turn blinking green, then release the pin from the reset hole. 3.Wait one-half to two...- nossah
- Post #6
- Forum: Security, hacker detection & forensics
-
Proxy server behind NS10
Are you connecting to the IM server via name or IP?- nossah
- Post #2
- Forum: Security, hacker detection & forensics
-
NS25 DMZ and Untrust within same subnet
I would put the Trust and DMZ interfaces in NAT mode. I would then setup the Trust and DMZ interfaces with different private address schemes. For example: Trust - 192.168.1.X/24 DMZ - 192.168.2.X/24 Then you will need to add a MIP(Mapped IP) to the webserver in the DMZ and another MIP for...- nossah
- Post #2
- Forum: Security, hacker detection & forensics
