Search results for query: *

No DISA!! Just a four port analoque trunk!!

What a nice guy!!!

I will see!!

Listen, this problem happens occasionaly. I mean one or two times per week or less. So to isolate the lines from the PBX, as i did, it will not sure that the problem will occure that moment. Anyway my question is from your experience do you know if this problem is pbx problem?? thanks

Yes Trotski you are right. Cwc3 critisized and not help. What a guy?????

The problem continuous...At least for two minutes the lines ''Single line button'' remain busy and not return back. 1--I found the voltage 54 Volt on each line. 2--The carrier check the lines check and found nothing.

sometimes happens and sometimes not?? Why??

Please let me know if it is possible to disable the feature of Message indication from missed intercom calls on TDA and TD 500 series.

Has TD 500 system the ability to forward one extension(i.e 101) to ICGgroup(i.e 500)??

For Dial(12)--Toll restriction Area code selection. In book writes that all area codes except those entered here will be denied, but this can not be done!!

Sorry, i see this system for first time 1.What is the toll restriction codes(what command)?? 2.Toll restrictor?? Thanks.

I set ext16 class 3 but no effect was occur!! The system has only 3 classes.

Hi, Is it possible to apply Call restriction (international)on KX-T61610CE.?? Thanks

ext 105 it was Portable station extension. May i made it delete and no deregistration??Thus i had all this mess.

On a TDA 30 v3 i have 9 PS TD7590. I am trying to install a new PS Dect KX-TCA155. During the registration procedure from the maintenance console, I am choosing the new extension 105 to Register, then my screen freeze and get this indication ''Error indication EA003601 Received Time Out''. 1...

Does ONLY the Auto ATTENTAND service energise the ''Incomplete call handling for busy''.???

check/put the maschine direct to your port to avoid any bad wiring which are limiting voltage.

Does ONLY the Auto ATTENTAND service energise the ''Incomplete call handling for busy''.???

I made custom service 1 to transfer the call to the operator 101. If operator 101 not answer the call the mailbox parameters ''Incomplete call handling for no answer'' is transfer to 'specified custom service 2 (please wait)', but if operator is busy the ''Incomplete call handling for busy''...

I have to change also the mailbox parameters of 101??, because the 'leave a message', 'transfer to operator' and 'return to top menu' are selected. Thank you