I've upgraded my 1924-a with the enterprise software I recieved from the upgrade kit...I now have the CLI but I don't have the option to make VLANS only bridgegroups?? any ideas???
Cisco Catalyst 1900/2820 Enterprise Edition Software
Version V8.01.00 written from 192.168.001.201
Copyright...
I'm studying to get my ccnp and I purchased a 1924 switch recently. Unknowlingly, I purchased the standard edition
(but I got it at a cheap price) and I have been going bonkers trying to upgrade it but I can't find the enterprise upgrade kit...cisco does not even offer it anymore as I called and...
Yes, one port is used to connect to my LAN but the WAN port is used for my internet T1. My intranet router has a separate T1 with its LAN on the same network as the sonicwall...so there are two different t1s and two separate Lan addresses for each, both on the same network. so i made LAN static...
i have a sonicwall and i am having a problem with getting my workstations to connect to both the sonicwall and my router. i have the router and sonicwall on the same subnet as the workstations. I have 4 static routes pointing all traffic that should be going over my router (intranet)in the...
i have a 1720 with a T1 wic and isdn module. my t1 was out of service recently and my router was placed on dial backup...when i spoke with telco they said they were looping the csu in the router....what commands could i run to see if they are actually doing anything? or see if a loop is up or if...
I have a 100gb western digital caviar hard....when i place it on one of my machines as a slave it comes up no problem. but when i put it as the master on my second pc i get a disk read error any suggestions??
just an FYI....i found the fix for EZCD creator and XP for people who are having the problem I was listed above......you have to go to the recovery console and rename Prtseqrd.sys to Prtseqrd.rox. It should be in c:\winnt\system32\drivers...suprisingly enough found it on Roxios website after a...
i have XP professional and installed EZCD creator for my burner and now i get a blue screen stop error...it says IRQL_NOT_LESS_OR_EQUAL and fails to boot....i tried Safe mode and tried booting from the last known config both come up with the same result....the only thing i am able to get to is...
i was getting a explorer.exe error every other time i tried to go into my computer or c: . it would say explorer.exe has generated errors and will be restarted. so i tried reinstalling win2k as an upgrade and now i get up to the startup screen with the white progress bar....and then i get a...
anyone ever seen an issue with checkpoint sending out duplicate packets?.....checkpoint running on windows NT sp6
....running a few workstations natted under one ip...however when i run a sniffer i see two packets being sent out my firewall simultaneously.....my remote connection sees the same...
I set up a tftp server to send my the latest IOS i have to my 2500 however I don't have enough room on my flash and when i go to erase the current image i get a %dev_open: System flash not writable error message.....so i guess my flash is read-only how can i change that???
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.