Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Drum not turning when maintenance roler rises to drum
Check your Ink Heater 1 cabling[if the 37,010:43 error is correct]as this is a PEST error. You need to run Y axis encoder test to ensure te drum has not stalled or defective. Possible bad encoder which means you will need to replace the drum[encoder is not sold seperately]. Run the drum...- pcsimtech
- Post #4
- Forum: Printers general discussion
-
Phaser 7400 Fault 917
Error in the Transfer Unit Belt. The Belt Rotation Sensor indicates an error. Replace the Transfer Belt or look for an obstruction.- pcsimtech
- Post #2
- Forum: Printers general discussion
-
Phaser 7500 RAM Error
Did you buy PC RAM or Xerox DDR2 RAM?- pcsimtech
- Post #2
- Forum: Printers general discussion
-
Phaser 8500 Cyan Not Printing
Yes when you use non xerox ink the cyan from the non xerox company has a different make up than true xerox colors. The best thing that you can do is replace the printhead. the use xerox color ink.- pcsimtech
- Post #4
- Forum: Printers general discussion
-
Per Drop Testing Cost???
It depends on to type of wire used[5 NP, 5P, 6NP, or 6P{all have different prices}] and the number of drops. If you are going to certify each wire that takes time so you need to know at least a best guess number of drops they will need. Factor 10% more wires[10=11] and then go from there.
