Search results for query: *

MIPS reset seems to restore service temporarily. Clearing the ARP Table on the network router also restores service. whats the solution??

How to set the VM Box greeting to your temporary greeting, and back to normal.

I have tried most obvious variations of the spelling to schedule (using Opsman) this event to occur. Other maintenance commands are successful using opsman, BUT I must be spelling this command incorrectly. Tried HST COURTESY FAILOVER; HST CO FAILOVER; HST CO FA; hsHandoff. and none appear to...

Mitels DHCP option 125 configuration tool did the trick.....

Mitels DHCP option 125 configuration tool did the trick. Thanks to all who read the original post.....

I have tried static settings for the tftp server etc, and also tried dhcp option 125. Do you have an example of the option 125 settings from a site that works???? Thanks

3300 running 9.0.3.15, Sip user licenses applied, trying to configure for 5302 phones, OR alternately can use 5220 dual mode for testing.... seems to be stuck in the negotiating DHCP sequense on the 5302. When I apply static IP address-subnet-gateway and TFTP address, I get to a username...

ICP running 9.0.3.15, SIP user licenses have been purchased and installed. Am trying to get a 5302 SIP phone to register with the PBX. SIP Registrar config in my machine does not show registration enabled. I believe that the DHCP option 125 in the cisco switches is set correctly, and the...

Try Terry at Dean Enterprises... 800-451-2089

Doesn't work in 6.0, expected fix in 6.1

when logging out, the server shuts down.. Any suggestions

IMF, You can also get the file by running the system diagnostic reporting tool, and download the results to your PC.... One of the files is the diag.dat, another one is diag.sav (history file of the same data).. Thanks again for pointing me in the right direction..

Thanks IrwinMFletcher, Got the data, opens nicely in excel... Is there a better way to read it, or have I got the weapon of choice??

Does anyone know how to look at the logs in the embedded VM on a 3300??? I need to find out when a message was recorded, when the light was turned on, and when the user played it. Easy on a NP 70, but I havent found the secret for the embedded VM.

1. Double check COS option 'Multiline set VM message erasure allow' set to yes. 2. Load IPDevice## (if not sure what IPDevice## is associated with this set, look in ip telephones all, lower pane) jg

Got a call from my VAR today. I asked him to check with product support to se if ANYONE has this working... Their answer is that they created a test bed environment, like the one I have and it doesnt work there either...... Back to development, and the ticket stays OPEN..... jg

My host site(for this application, and more to come), has predominantly PRI's as service. Fortunantly, the cluster at the main site has an AX controller that has ONS cards I can use for this application. The PRI's are connected to another MXe11 so I can do my IP trunking and create a seperate...

3300 running 9.0.2.31_1, with per cabinets (containing ons circuits) some of these extensions are being used as OPX (TDM over IP) trunks on a remote KeySystem. I have defined their normal calls in ars and am sending their calls over a cor restricted route where the digit mod inserts the '9' for...

I need to have a ONS circuit dial an outside number(seven or ten digit call) without first dialing the access code or a feature access code. They have a mix of copper trunks, and some extensions off of the PBX, all calls must be dialable using the same number of digits reguardless of which...

If you did a data restore, use the programmed system level password.. Mine happened to be eight characters in length, so I didnt have a problem. After login (system level) go to security options and change the number of characters in the pw to the length you desire. jg