Search results for query: *

Can LIC-CM7.1-7816= be installed on an MCS7825I4-K9-CMC2 if the 7825 will never need more than 500 users?

PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password /wa4xlpXKKs8PfGU encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname XXXX fixup protocol dns maximum-length 512 fixup protocol ftp 21...

I had a VPN solution working well with a 501. I added two internal remote sites, and added the networks to the no-nat access-list. As soon as I did, split tunneling from the VPN stopped working. No other changes were made. Any suggestions would be appreciated.

I have a 3Com 4226T switch that I need to get connected to a Cisco 3560-24 switch via a 10/100 port. Any suggestions would be appreciated. Thanks.

Anyone know of any special configuration requirments to make a Citrix MetaFrame app. work across frame relay using Cisco routers? Thanks in advance for your help.

Thanks for the response. I'll check the phone loads. #1 & #2 may be a result of bad infrastructure.

my customer is experiencing the following problems with there CME/CUE. 1.The phone displays that calls are missed, but the phone has not rung (sporadic occurance). 2. Another extension has 12 voice mails, but 10 of them are "blank". 3. Another extension receives a call, the call is answered...

i need to create a Cisco config for DSL backup for frame relay. The head end needs to assign static IPs to the remote clients, and NAT the statics to the FA0 IP address (global outside). The remote clients are 2801 routers. Some of them have ADSL cards, and some of them are pluging into the DSL...

My customer wants to bring in 4 PRIs for his voice network. He has a 6509 with a channelized T3 module with room on the T3 for the PRIs. I need to ge the PRIs off the T3, and out of the 6509 into a 2811. The 6509 does not have sufficient resources to support a WC-SVC-CMM. Any help would be...

I need to choose a method for bringing up the DSL or Analog modem dial backup (for a frame relay network), but I don't know which is better; dialer watch, or floating static routes. Any help is appreciated.

Wow! Thanks for the rapid response. I have encouraged many others to join tek-tips because of the quality of the people here. Thanks again for your help.

I'm trying to find a Cisco 2800 series router configuration for an ADSL WAN interface.

I'm looking to find an ADSL WAN interface configuration for a Cisco 2801. The ADSL will be used as a backup for Frame Relay service.

Excellent reply. Thanks much. The VPN is pre-shared key. We got the VPN up, but now the remote site (pix) users can't get their e-mail from the exchange server at the main site (1841). The users at the remote site can get to other server resources at the main site. The MIS guy turned off telnet...

I need to connect a BCM to a Cisco 1760V via a P-T-P T-1, and pass voice and data. Any suggestions other than "don't do it" would be appreciated.

I'm moving a site to site VPN between 2 1841s, to between an 1841 and a PIX501. If there are any commands that need to be on the PIX so that it will bring up the tunnel, I would appreciate the help. Thannks.

I'm looking to move a Paddlock firewall config to a PIX506E, but I cannot find info on the paddlock firewall configuration conventions. Any help would be appreciated.

Hey thanks for the rapid reply. I can use the contivity router at the remote site for the DHCP, but do the phones need to be on the same LAN IP address scheme as the head end, even with the nat'ing?

Does the head end BCM require a public IP addresses for each VPN tunnel (from a remote site)? Can/(how does) an IP phone at a remote site get a DHCP address from the head end using double nat'ing, VPN & DSL Internet?

Check out http://www.altimatech.com/home/index.php?mid=0. Good luck.