Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ADSL WAN interface configuration
- Thread starter honest1
- Start date
Basic ADSL PPPoA configuration on a Cisco device is as follows:
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 1/150
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname uourusername@isp.com
ppp chap password yourpassword
!
ip route 0.0.0.0.0.0.0.0 dialer0
!
dialer-list 1 protocol ip permit
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 1/150
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname uourusername@isp.com
ppp chap password yourpassword
!
ip route 0.0.0.0.0.0.0.0 dialer0
!
dialer-list 1 protocol ip permit
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question