Search results for query: *

Hello, Yes indeed, We had some customers with the same problem where the pc was connected to the 5550IP keypad. (normal connection) But some (new-model) NIC's of client PC's didn't work properly with the PC port on the 5550IP Keypad. The best and simple solution is to connect the PC's NIC on...

Hi, Some Nic's of PC's didn't work properly with the LAN port on 5550IP keypad. The are problems with duplex en speed. The pc lost there lan connection to 5550IP keypad. The best solution is to put the PC's NIC on a seperate lan port on the switch (data vlan) en put the 5550IP keypad on a...

Hi, Wich type of trunking is used at this side? E1/T1 or SIP or Analog? Because the E2T-card is only used for conversion between IP and Non-IP end-points

What is the reason that Release 8.0 isn't available on MOL ? [Replication or Save Conflict] 3300 ICP Rel 8.0 schedule update ( new ) 3300 ICP Rel 8.0 is currently targetted to release on Aug 31, 2007 What are the issues ?

Hello John, The {090} in the digit mod ass is the Beaer Capability of the ISDN30 call setup to the network. The fitst digit is the BC,HLC,CLI) 0= Speech 9= All 0= CLI allow John, Wich site is it the Netherlands ? Kind regards, Fred

Hello, The name field of the Ercison isn't the same field as the Mitel, these fields are vendor specific info elements. If you link to Mitels (MN3300 or SX200) with DPNSS then this info is transparant. But with other vendors some features are not working. Use the CCS trace command to check...

Hello, Check the following settings of the XP-client -> Control panel -> phone modems -> avanced setting If the Mitel Networks TAPI Service provider exist and check the config with the configure button. Select this phone option in the outlook contacts phone options. and check if you can...

Hello, The problem with your OPS-Manager likes a problem that is introduced when you make a connection with remote desktop and then startup the OPS-Manager application. This way of connection gives a error with the USB-dongle. Solution without rebooting OPS-Manager. Close the Remote desktop...