Looking to extend a 6 strand fiber from the buildings entrance to a new MDF room that is being built about 100ft away.
The customer doesnt want to pull new fiber or splice the fiber.
I was thinking of putting in a wall mount fiber cabinet and then push the fiber to the new location on some type...
So,trying to change some CCR tree programming and have disabled the tree(so it says), until I make changes and try to save it it keeps telling me the tree is enabled....
Voicemail on the way out???
If had this come up before and did a complete reset on the voicemail, and rebuilt...
All-
Im looking for a company that provides some type of protective covers for speakers and wireless antennas.
I am mounting antennas in an area that may get wet at times and am looking for an enclosure for Cisco Wireless antenna.
Any input is good input-
Thanks!
We have found that there are 2 different fibers installed to try to complete a connection. The feed from the Headend room is a62.5Um fiber running to a junction point. From there a 50Um fiber goes out to the facility.
Is there any way to make this happen? Currently we have good signal to each...
Looking to Connect 2 Locations 600' apart. The owner does not want any coax in the underground pipe. Im pulling in 6 Strands of Fiber across and was thinking of using CATV/Fiber converters to acomplish TV signal????
Another guy suggested pulling sheilded CAT5e across and using converters on...
Just pulled in 3 runs of 950',600'and 350' at football stadium. pulled through provided underground conduits, to all buildings. Now need to terminate.
Looking for Current Rates.....
I have to pull Fiber out to a new football stadium- ~1800' Underground in 4" pipe-
Mixed reviews on type of fiber to use. Indoor/Outdoor etc.
Want to push 10gig through-
Any Suggestions would help
These people are the low bidders who are "learning". Asking how to label and if you should seams pretty weak! Go ahead and not label,then tone, and see how much time you spend in the end.
I have just re-toned/tested/labeled/provided as builts,for an entire school districts cabling plant that was...
Im using the Microtest Omniscanner for testing- testing all exisintg cabling throughout a school district.
I need to provide a repair report and solution.
Im looking for a solution for NEXT and Return Loss.
I am doing a cable certification project and am looking for some insight on NEXT and Return Loss.
What is the best solution for this?
Over the years I have re-teminated/re-pulled etc....
Any info will help, I will need to present this information with a solution to my customer within the next...
Thanks to all....
Ive submitted the bid and came in very close to everyone else..
My bid was $10 a drop, which included labor,documentation, and as builts.
The range of bids were - $8;$11;$13;$14;$19;$25;$45
Most people were pretty close except for the guy who wants $45 a drop!!!
Thanks for...
I need to provide a proposal for a school district to Certify every voice/data cables at 6 schools. They are looking for a per run cost, since they do not know the exact number of drops?
Any ideas on how to price?
Any info helpful-
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.