Search results for query: *

Only thing I did was wait for it to finish. Took 4 hours to finish and then came up fine.

Hi All - Got an issue that I need a little help with. NetWare 6.5 sp6 (traditional volumes). Server had a soft abend this morning and upon reboot it hung at "initializing transational tracking system". I then brought server up w/ -ns -na, loaded startup.ncf and then loadstage 1. Server then...

Yup. Everything is working fine now. I also just wanted to say that the rx load does not stay that high, it averages between 60 - 70%. thanks again for all your help.

Thanks for the advice texnut, but the sniffer is coming up clean. The T1 provider finally called back and let us know that they were having problems with a couple DNS servers in the Chicago area, which most of our traffic hits. Once they bounced one of the servers, problems were very few, the...

A colleague brought up the EDNS issue with server 2003. Don't know why all of a sudden this would affect us since it's been working fine for the last 3 years with our 2003 DNS servers, but it's worth a look. Has anyone else had this type of issue, in conjunction with a CheckPoint NGX R60...

We have a full T1. We pulled the stats this morning which it started around 8:30 and no errors are coming up on the router at all, been pulling stats for about 20 minutes, now Internet is back working. Trace routes are hanging for about 25ms before the next router after ours, then start...

I need to go home. It's been a long day already. grabbed my test router accidently.. here's the Internet Router.. Serial0/0 is up, line protocol is up Hardware is PQUICC with Fractional T1 CSU/DSU Description: Frame Circuit Internet address is XX.XXX.X.34/30 MTU 1500 bytes, BW 256...

Sorry, I'm an idiot.. Grabbed the wrong one.. Here is the correct one. FastEthernet1/0 is up, line protocol is up Hardware is AmdFE, address is 0030.9499.6e90 (bia 0030.9499.6e90) Internet address is 10.35.1.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255...

Thanks plshlpme! I'm brain dead lately and couldn't remember what the next step would be... Here's the output from the current status... I'll post when everything starts slowing down again. Router1>sh int s0/0 Serial0/0 is up, line protocol is up Hardware is QUICC with integrated T1 CSU/DSU...

Good Morning - Wondering if anyone can help me with figuring this out. For the last week our Internet (T1) has been intermittantly dropping web site attempts for about 20 minutes each hour and then will come back with no problems. ISP (Qwest) states there is no problem on their end at all...

I got it working. I forget about Nokia's Voyager. I added the subnet's there and it's all working now. Thank you for your help.

Figured it out... DOH! I forget about Voyager! Everything is working great now.

I have created 2 new subnets in my internal network. They can communicate with the rest of the internal network, but they can not get out to the Internet. We have this working with another subnet, but they have their own router. I can not find in SmartDashboard anything that specifically...

Well, since I couldn't find anything in SmartDashboard, I decided to go right to the Nokia device. In the initial file I do see a couple entries setup specifically to the 10.50.10.0 network. Now I just need to figure out where those came from and how to update that file. I'll check with...

Thank you for your reply. Why would the existing 10.50.10.X network work then if I have not specifically allowed it out? Maybe I'm missing something, I apologize, but I have looked through the Checkpoint SmartDashboard completely for a rule that allows 10.50.10.X specifically and there is...

I have created 2 subnets that can communicate internally fine (10.50.4.X & 10.50.20.X). However I can not get them to see the Internet at all. We run our NAT'g on a checkpoint firewall and the following is allowed out 10.50.0.0. We currently have another subnet (remote location 10.50.10.X)...

Has anyone had the issue with accessing their yahoo web-based email and it coming up blank? If so, how did you get around it? Yahoo comes up fine, but once I log into email, nothing shows up. All our Treo's do this. Any ideas?

I had to reset the SIC last night and now when my vpn clients try to connect, they get a vpn1 server could not find any certificate to use for IKE. I've been bumped to 2nd tier support at Nokia, but have been waiting quite a while for a call back. I would like to know what would happen if I...

Does anyone know if the Integrity client for Windows Mobile works with NGFP3? I'm trying to allow my Treo users a secure connection via vpn and am having difficulty figuring out how to set it up in NGFP3. I can see the connection coming in, but it gets dropped under the last catch all rule...

We do have a CISCO router, so I'll take a look at the netflow. Thank you.