Search results for query: *

I am trying to logon to Aastra Bms configurations;im getting cannot connect to the system[10986] Could not get I/O for the connection to the agent host 127.0.0.1(invalid port 7777?).Please help Thanks vhttps://res.cloudinary.com/engineering-com/raw/upload/v1441883771/tips/Aastra.jpg_lyfdqk.docx

Thanks,manage to get it working

when I am running BMS server through the internet.

I have a problem of running a BMS server under windows version 7 Professional.Please help

Should I reset the System and how do I do that?

I am located in South Africa

We have BP250 pabx system and we are unable logon to the system.We are unable to get the installer.Is there anyway to override the password for the system? Thank you in advance

I have checked all,It was working in one of the magazines,due to PU5DC card which burned during power failure,we are trying to put the cards in the empty slots/not equipped ones

This is what i did and the BPOS 006-1-62 77 shows NO VALID DATA STORED.I am unable to see extensions/equipment info on the board. Please help CNLIP:LIM=6,DEV=YES; LIM CONFIGURATION LIM NUMBER 6 LIM CONTROL LIM CONTROL NUMBER OF SERVICE SYSTEM SIDE SYSTEM STATE...

I want to add Card and activate in a magazine (006-1-62).It shows passive Please help CNLIP:LIM=6,DEV=YES; LIM CONFIGURATION LIM NUMBER 6 LIM CONTROL LIM CONTROL NUMBER OF SERVICE SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM A EXECUTING 1...

How do i check the extensions that are live in each Lim and magazine and or card. I appreciate the help i get from this forum. Thanks

Thanks.Lim 5 is working now after checking LPU.Only problem is to replace PU5DC card

We have problem with one of our Lim 5 which does not contact.Tried to restart the said lim with no success.This happened after power outage and the PU5DC was burnt and we exchanged the card.Please help.This are alarms ALLOP; ALARM LOG IDENTITY: JUS-BC9B-CNI84 VERSION: LZY2035143/1/R1A DATE...

It is MD110 and 10 PRIs

For over 1000 extensions(DDI numbers) we have got common number as CLI,for example if anybody makes a outgoing call from any department the CLI number is the same.Can you please help so that we can setup CLI for every DDI number.Thanks in advance

We used to pickup calls for groups using common number 2 and now after reloading the system we cannot pickup though we can set Call pickup groups.How can we assign a common call number(same number as before) for call pickup group? Thanks

We used to pickup calls for groups using common number 2 and now after reloading the system we cannot pickup though we can set Call pickup groups.How can we assign a common call number(same number as before) for call pickup group? Thanks

After power outage one lim was off and we encountered the cuttinng of calls during conversation(on all lims).We restarted the system and it came up.When we do the dumping the system shows that I/O device board blocked. ALLOP shows FAULTY IPU BOARD OR CONNECTED I/O DEVICE BUFFER TRANSFER HAS...

Yes the number is in our DDI series.It sometimes rings once then drops.Again it sometimes says congestion

Extension(DBC 201/211) cannot receive calls externally.Can dial out internally and externally.Please help Thanks