Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Activation of Magazine

Status
Not open for further replies.
techpc

techpc

Technical User
Apr 16, 2013
29
ZA

I want to add Card and activate in a magazine (006-1-62).It shows passive

Please help

CNLIP:LIM=6,DEV=YES;
LIM CONFIGURATION
LIM NUMBER 6
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 1 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
24575 KB 11178 KB 11178 KB
BUAR1 997 KB BUAR2 INVALID
CURRENT INTER LIM SIGNAL PACKET LENGTH: 90
INTER LIM SIGNAL PACKET LENGTH CAPABILITY
BPOS CAPABILITY
006-0-00 90
DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
006-0-00 36 32 ACTIVE
006-0-10 102 32 ACTIVE
006-0-20 77 16 ACTIVE
006-0-22 77 16 SYSTEM BLOCKED
006-0-30 77 16 ACTIVE
006-0-32 87 16 ACTIVE
006-0-40 87 16 ACTIVE
006-0-42 87 16 ACTIVE
006-0-50 87 16 ACTIVE
006-0-52 NOT EQUIPPED
006-0-53 NOT EQUIPPED
006-0-60 87 16 ACTIVE
006-0-62 87 16 ACTIVE
006-0-70 42 32 ACTIVE
006-1-00 102 32 ACTIVE
006-1-10 87 16 ACTIVE
006-1-12 NOT EQUIPPED
006-1-13 NOT EQUIPPED
006-1-20 87 16 ACTIVE
006-1-22 87 16 ACTIVE
006-1-30 87 16 ACTIVE
006-1-32 87 16 ACTIVE
006-1-40 87 16 ACTIVE
006-1-42 87 16 ACTIVE
006-1-50 87 16 ACTIVE
006-1-52 87 16 ACTIVE
006-1-60 NOT EQUIPPED
006-1-61 NOT EQUIPPED
006-1-62 77 16 PASSIVE
006-1-70 NOT EQUIPPED
006-1-71 NOT EQUIPPED
006-1-72 77 16 SYSTEM BLOCKED
006-2-00 102 32 PASSIVE
006-2-10 77 16 PASSIVE
006-2-12 NOT EQUIPPED
006-2-13 NOT EQUIPPED
006-2-20 77 16 PASSIVE
006-2-22 77 16 PASSIVE
006-2-30 87 16 PASSIVE
006-2-32 87 16 PASSIVE
006-2-40 87 16 PASSIVE
END
/* SUCCEED */
 
Sort by date Sort by votes
FYI,
Board goes to state ACTIV, if first extension on board was activted (KSEXI....)
Regards,
Norbert
 
Upvote 0 Downvote
This is what i did and the BPOS 006-1-62 77 shows NO VALID DATA STORED.I am unable to see extensions/equipment info on the board.
Please help

CNLIP:LIM=6,DEV=YES;
LIM CONFIGURATION
LIM NUMBER 6
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 1 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
24575 KB 11178 KB 11178 KB
BUAR1 997 KB BUAR2 INVALID
CURRENT INTER LIM SIGNAL PACKET LENGTH: 90
INTER LIM SIGNAL PACKET LENGTH CAPABILITY
BPOS CAPABILITY
006-0-00 90
DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
006-0-00 36 32 ACTIVE
006-0-10 102 32 ACTIVE
006-0-20 77 16 ACTIVE
006-0-22 77 16 SYSTEM BLOCKED
006-0-30 77 16 ACTIVE
006-0-32 87 16 ACTIVE
006-0-40 87 16 ACTIVE
006-0-42 87 16 ACTIVE
006-0-50 87 16 ACTIVE
006-0-52 NOT EQUIPPED
006-0-53 NOT EQUIPPED
006-0-60 87 16 ACTIVE
006-0-62 87 16 ACTIVE
006-0-70 42 32 ACTIVE
006-1-00 102 32 ACTIVE
006-1-10 87 16 ACTIVE
006-1-12 NOT EQUIPPED
006-1-13 NOT EQUIPPED
006-1-20 87 16 ACTIVE
006-1-22 87 16 ACTIVE
006-1-30 87 16 ACTIVE
006-1-32 87 16 ACTIVE
006-1-40 87 16 ACTIVE
006-1-42 87 16 ACTIVE
006-1-50 87 16 ACTIVE
006-1-52 87 16 ACTIVE
006-1-60 NOT EQUIPPED
006-1-61 NOT EQUIPPED
006-1-62 77 16 PASSIVE
006-1-70 NOT EQUIPPED
006-1-71 NOT EQUIPPED
006-1-72 77 16 SYSTEM BLOCKED
006-2-00 102 32 PASSIVE
006-2-10 77 16 PASSIVE
006-2-12 NOT EQUIPPED
006-2-13 NOT EQUIPPED
006-2-20 77 16 PASSIVE
006-2-22 77 16 PASSIVE
006-2-30 87 16 PASSIVE
006-2-32 87 16 PASSIVE
006-2-40 87 16 PASSIVE
END
/* SUCCEED */


CNBIP:LIM=6;
DEVICE BOARD REVISION INFORMATION
DATE: 03APR14 TIME: 09:27:15
BPOS BOARD/ PRODUCT REVISION
BOARDID NUMBER
006-0-00 GJUL4 ROF1375393/1 R8A
006-0-10 TMU ROF1375335/2 R3A
006-0-20 ELU28 ROF1375334/3 R1B
006-0-30 ELU28 ROF1375334/3 R3B
006-0-32 ELU2|) ROF1375339/11 ) R4C
006-0-40 87 CAA1122855 R5B-
006-0-42 ELU29 ROF1375339/11 R4C
006-0-50 ELU29 ROF1375339/11 R6F
006-0-60 ELU29 ) ROF1375339/11 R4C
006-0-62 ELU29 ROF1375339/11 R10J
006-0-70 LPU5 ROF1314602/3 R4A
006-1-00 TMU ROF1375335/2 R3A
006-1-10 ELU29 ROF1375339/11 R10J
006-1-20 ELU29 ROF1375339/11 R10J
006-1-22 ELU29 ROF1375339/11 R10J
006-1-30 ELU29 ROF1375339/11 R10J
006-1-32 ELU29 ROF1375339/11 R10J
006-1-40 ELU29 ROF1375339/11 R10J
006-1-42 ELU29 ROF1375339/11 R10J
006-1-50 ELU29 ROF1375339/11 R10J
006-1-52 ELU29 ROF1375339/11 R10J
006-1-62 77 NO VALID DATA STORED
006-2-00
FAULT INTERRUPT
/* SUCCEED */
 
Upvote 0 Downvote
looks like a hardware problem.
might be a faulty board or faulty slot in the magazine.
Can you check the PINs on the backplane of this slot, maybe on of them was bend over and has a contact with an other one.
 
Upvote 0 Downvote
I have checked all,It was working in one of the magazines,due to PU5DC card which burned during power failure,we are trying to put the cards in the empty slots/not equipped ones
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

klobo1970
  • Locked
  • Question
cil-increase the number of digits
Replies
1
Views
91
bpetya
bpetya
Alonealpha
  • Locked
  • Question
who knows how can I recovery the User name and Password of Web GUI for Aastra mx one.
Replies
0
Views
65
Alonealpha
Alonealpha
rammehar1968
  • Locked
  • Question
Configration of Diavox system
Replies
0
Views
59
rammehar1968
rammehar1968
feruzin
  • Locked
  • Question
increasing length of ring in ericsson md110
Replies
0
Views
104
feruzin
feruzin
nitram11
  • Locked
  • Question
BP250 : 1. VMU-HD caused errors and must be restarted; 2. max. number of dect base station in system
Replies
2
Views
136
nitram11
nitram11

Part and Inventory Search

Sponsor

Back
Top