Search results for query: *

I needed a 16ELCJ-B SP 3935 or higher card, I had to put SW10 dip switch 1 to ON and SW11 dip switch 5 ON for it to work, Switch 1 on for when system uses software Series 7300 Release 7 or earlier, off for when system uses software Series 7400 Release 8 or higher, SW11 switch 5 for type of...

Hallelujah! I got it working. Thank You belevedere, that's what I needed, a 16ELCJ-B SP 3935 or higher card, I got a SP3935 and it worked. For the record, I had to put SW10 dip switch 1 to ON and SW11 dip switch 5 ON for it to work, and now.... its working like a champ. Thanks again for your...

It appears they sent me the wrong card, it has no dip switches SW10 or SW11, I will have the right one tomorrow. :)

They said its a brand new card, never been used,they are sending another today next day air.

Used a different unused slot for it 002140-002157, analog lines are on 002100-002107, checked all ports for something else programmed on it 002140-002157, there was nothing, deprogrammed it and programmed it up again 002140-002147, all 8 as TEC 12, as soon as you program the first the port...

Okay, so I got a 16ELCJ-B card with SP3935, put the card in and I get a Min Alm, no green run light, no blinking unused port blinking lights, nothing :( Help!

Okay, I'll look for one, I did make some headway, I found if you call the vm pilot then press the voice btn it answers and knows the extension, I pgmed a spd btn for the pilot then voice (transfer key) XXXXV, press it and it works every time, now if I can add that to fwd bsy/nans and incoming...

Yes, I did know that, Wh/Or-Or/Wh, The AD-64 used to be on a 2000IVS for a short time, worked perfect then. I am searching the records too, haven't found anything on the SP level yet, got to figure this out, customer is getting very antsy!

The MCI is working, its the only thing I'm getting information from to the AD-16, I used the PBXpert and the lines failed, when I put a phone on them they work just like a digial phone should, the lines are in numerical order, my 16-ELCJ-B is SP 3295 B 6 001, I have a B 5A and a B 1A available...

Sorry, First time newbie, Threaded the wrong forum :(

Thanks belevedere, I did set them up in numerical order at first but may have got changed while troubleshooting, I will check them again. MCI was working with the old VM, I will test again to make sure. Hope you find the SP chip number, can I use a 16-ELCH card instead? Your help is much...

Hi Everyone, I replaced a bad Repartee with a NEAXMail AD-64 connecting to A NEAX ICS 2400 PBX, The VM is programmed and up and running but doesn't answer when called, the lines are tested and working, all I get is a ring no answer, When I call from an extension, the VM ports show "incoming...

Hi Everyone, I replaced the bad Repartee with a NEAXMail AD-64 connecting to A NEAX ICS 2400 PBX, The VM is programmed and up and running but doesn't answer when called, the lines are tested and connected to the diologic boards via 36 pin cable to AMP connectors to the block, All I get is a ring...

Hello Everyone, I'm between a Rock and a Hard Place! Had a Activoice Repartee VM stop working, out of the blue it shuts down to the OS/2 icon screen, when you click restart voicemail it starts to boot, then says "error Key is old format, call to have a field programmable key installed, press any...