Hi Everyone, I replaced the bad Repartee with a NEAXMail AD-64 connecting to A NEAX ICS 2400 PBX, The VM is programmed and up and running but doesn't answer when called, the lines are tested and connected to the diologic boards via 36 pin cable to AMP connectors to the block, All I get is a ring no answer when I call it, I know they punch down weird, I beleive it starts on the W/O pair block pins 2/27, then skips a pair and so on down the line, the AD-64 was working on a 2000 IVS for a short while, then removed, defaulted the AD-64 system and programmed for the NEAX 2400, It will not work, I'm at my witt's end, I have tried everything, what am I missing frown Please HELP!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEAXMail AD-64 to NEAX ICS 2400 PBX
- Thread starter mophxaz
- Start date
- Status
Similar threads
- Locked
- Question